End Call on device registered to Spark fails to clear call legs on coSpace
Use case: CMS dails out to participant configured on Spark.
Device have SIP URI configured. Call gets placed successfully.
Now from device(DX650) click on end call button....
Hi Team,I have successfully achieved Whisper coaching supervisor functionality with JTAPI & CUCM but I'm stuck on few things:- How to end Whisper Coaching?- Sometime whisper coaching not triggered? Code:try {int actionDelayMillis = Integer.parseInt("...
Hello community,We have a requirement to disconnect some outgoing calls (to the PSTN) after 5 minutes, but not to apply this config for some users (management). We are currently disconnecting all calls (incoming and outgoing) after 5 minutes, but thi...
I'm trying to write some test apps for connecting to a CTI.I'm trying to find out where to get the JTAPI library that supports this? Seems like alot of the existing links/pages are broken.If someone could point me to the right direction that'd be gr...
Hello Team,
Together with my customer we are working on a CUCM config assurance script and the goal is to query certain CUCM parameters via AXL, verify them and display the misconfigured parameters to users so they can correct CUCM configuration on w...
I'm trying to determine how to track if a phone deregisters from CUCM 11.X. What the alert or event might be? Is there a trigger that is sent that can be captured? Thanks in advance
I have a problem wtih incomignn call when we are using tcl on dial-peer. We have one example did that is unsed but this DID associated different UCCX scriptWhen I remove service ivr on dial-peer 100 voip tcl application still invole particular dial-...
Hello Dev Guys,I want to make a script to insert the configs of CUCM automatc, how can i start this? Could you guys give some directions? Regards Leonardo Santana
Hi ,I have an application where the external user will dial in using toll free number to the CTI Route Point and based on the route pattern it should be redirected to a particular CTI Port ( Here for every meeting one CTI Port is allocated to suppor...
Hi,I am developing Call Canter application using VaxTele SIP Server framework and Cisco IP Phones (SPA514G). While development I am having an issue of voice clarity (voice is breaking). I contact to VaxTele support and they investigated the issue. It...
Trying to establish a TLS connection to CUCM and get this exception thrown when calling CiscoJtapiProperties.updateCertificate().java.lang.Exception: JTAPIProperties.updateCertificate : Certificate update failed, reason= 0 UpdateCertificate failed'W...
We have a CUCM and third-party system transfer issues.Call Flow: PSTN----->GW----->CUCM----->SIP Phone-----> Press button:Directory(Find the phone number of the third-party system corporate directory)-----> TransferCalling number:ACalled number:B (si...
Hi all,
we have CUCM 12.0 and i need to modify the inbound INVITE as per below example:
Current From msg:
From: "Maher" <sip:JabberGuest@abc.com>;tag=55180737_3200fdaa_a1bb118c-8443-4e82-81aa-a6148f5884bc
and i need to replace JabberGuest from the ...
Hi, I was under the impression that the x-refci value was the call-id, however this does not match the value of ciscoCall.getCallID().getGlobalCallID() How do I match the jtapi call events with the recording? As an example, I got 28594060 for the x-r...
Hi, all
I am newbie in the devnet world.
I am finding some codes using suds and zeep to connect via AXL to the CUCM. There is any advantage to use suds or zeep or in end of the day, the result is exactly the same?
Best Regards
