Hello,Is there an updated version available for the following matrix:https://developer.cisco.com/site/uc-manager-sip/faq/supported/Or to be a bit more specific, would it be possible to include the new Cisco 8821 WiFi phone in this matrix ?Thanks.
Hello,Is there an updated version available for the following matrix:https://developer.cisco.com/site/uc-manager-sip/faq/supported/Or to be a bit more specific, would it be possible to include the new Cisco 8821 WiFi phone in this matrix ?Thanks.
We have simple JTAPI application for all call control. I am getting the issue in consult call. Why I try to get TerminalConnection for the required terminal I am getting NULL in terminal Connection. Therefor I am not able to transfer the call from ca...
We have simple cisco jtapi application, the primary use of this application is to capture all event from CUCM (Call Answer, Call initiate, call hold, call resume, call transfer, call conf). We are able to achieve call Answer and Call Initiate by usin...
Hi,We use CallControlTerminalConnection.hold() to hold the call after the call is answered.But it always throw "PlatformExceptionImpl: Cti request timed out." few seconds after calling into this methodWe checked the state by calling CallControlTermin...
I'm developing an application that monitors the calls using JTAPI , I need to distinguish between ringing and answered calls using ("CallCtlConnEstablishedEv" event).I'm depending on "CallCtlConnEstablishedEv" event .I'm getting this event twice once...
Hi,I'm trying to rollout CiscoTSP driver (from CUCM 11.5 SU3b) using Command Line. It basically works, but the AUTOUPGRADE_TYPE option does not work as expected and documented.For example I use the following cmd string for setup:CiscoTSPx64.exe /s /v...
In our application, we have integrated Cisco switch and for telephony call control have implemented atapi api.When any conference member get disconnected from conference call then event OnCallStateChanged get raised for callstate.idle for all confere...
Hello,I'm using Cisco's EpApi for sound stream handling for call management. Everything works ok. I can get the streams, start the streams, sound is coming and going.I have found in the documentation the EpStreamCodecInGet function and implemented th...
We have a series of devices that have private DNs. When they make an outbound call to a particular destination, we want to intercept the call, lookup the appropriate callerid for that particular device (based on caller ip address, in our custom purp...
Hi,I'm new with Jtapi. We get addresses and terminals through jtapi library by using following method( provider.getAddresses(); provider.getTerminals(); ).My question is that can we get address of specific user through jtapi.Like I will give termina...
Calls are being routed to JTAPI extensions but no JTAPI events are received are received for offered, ringing, etc, in spite of observers being registered for this address. See extension 4912 in the attached jtapi log.Any ideas?Thanks.
Hi there I'm having a big trouble with transfers and JTAPI:In our company we named this scenarion single-step transfer Step 1:Connect via jtapi to cucmRegister CallObserver, AddresObserver, TerminalObserver for extension A, extension BBut not registe...
Hi,We develop a Active Sip Call Recorder, and some client in the past require encrypted call recording too, this Cisco Callmanager uses a token's for encryption, but the current version don't require them for encrypted sip calls, we want to know if t...
Hi, I have been using a sip normalization script I found on this website to modify the from header M={} function M.outbound_INVITE(msg) local from = msg:getHeader("From") --Get FROM Header local b = string.gsub(from, "<sip:.+@", "<sip:xxxxxxxxxx...
Hi Guys,I would appreciate your help on this. I used play_message_2_calling_then_connect.tcl script to play a prompt and connected the called party in the incoming POTS dial peer and it worked perfectly fine but unfortunately due to ISDN overlap rece...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-03-2024 06:31 AM | ||
11-30-2023 06:11 PM | ||
08-23-2023 10:35 AM | ||
08-09-2023 04:50 PM | ||
05-23-2023 02:08 PM |