Created by: Chikeobi Njaka on 11-12-2011 06:21:40 AM Hi, In the installation manual, it mentions "Post Installation" procedure, but I can't see any reference as to how to kink start this process. After installtion, all I get is the CLI login prompt. But according to the docs, I should "see the Cisco Media Sense First Server Setup Wizard". I see no such thing. I have installed twice to see if I missed anything, but I don't think I did. I was also supposed to see a link of some sort. Any help will be appreciated. Thanks.
Subject: RE: Primary Server Post Installation Replied by: Karamjit Singh on 11-12-2011 04:01:48 PM Hello Chikeobi,
You need use a browser to connect to the Administration UI by pointing your browser to http://<hostname or ip address>
Regards, Nick
Subject: RE: Primary Server Post Installation Replied by: Chikeobi Njaka on 12-12-2011 06:40:06 PM Hello Chikeobi,
You need use a browser to connect to the Administration UI by pointing your browser to http://<hostname or ip address>
Regards, Nick
Hi Nick, Fiannly got it to work. Don't know what I did wrong. I now face a different problem. I can't seem to configure the Call Control Service Provider. Screen shot is provided. Thanks.
Subject: RE: Primary Server Post Installation Replied by: Mayank Agarwal on 13-12-2011 02:01:18 PM Hello Chikeobi, You may be receiving this error because you might not have configured the DNS server at the time of installation. You should try condiguring the DNS server using the "set network dns" CLI command and try this screen again. Thanks, Mayank
Subject: RE: Primary Server Post Installation Replied by: Chikeobi Njaka on 13-12-2011 06:54:44 PM
Hello Chikeobi,
You may be receiving this error because you might not have configured the DNS server at the time of installation.
You should try condiguring the DNS server using the "set network dns" CLI command and try this screen again.
Thanks, Mayank
Hi Mayank, I didn't configure DNS because step 14 in the installation says to set it to NO. In anycase, setting it to yes would mean also configuring reverse lookup. That is problematic in my environment. I did configure it, though and the problem persists.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
