Data Center Switches

Hi Support,    Been trying to get my head around on how to get it working but still no luck. Firstly, let me say that i am new to Nexus Technology so i only based on Cisco Articles configurations. Any help would be highly appreciated.  Basically, my ...

Hi,     I am little confused on DCNM licensing. I need it for Nexus9300 switch. My question is do I need a license for each unit link for 10 switches we need 10 DCNM licenses or its only 1? CAn you please share me any link to study.

Hi all, I am wondering about CEF adjacency watermarks on Catalyst / Sup2T platforms / MPLS environment.Consider the following output:Switch#sh platform hardware cef adjacencies resource-levelWatermarks apply to regions available for allocation and no...

Hi   we are installing two 9706 The customer ask to have a reverse air flow on fans due the particular data center environment. Is it posible?   Thanks     Walter

Hi All,         We are planning to add Cisco MDS 9710 to Existing 9513 Fabric . I would request you to help me with the below questions . 1) As of now we have Cisco MDS 9513 in the environment and we are trying to add Cisco MDS 9710 , Will it be comp...

Folks,             When i do show mac-address table for a couple of mac addresses in my network i get multiple entries.   show mac address-table address 0008.e3ff.fd90     v la n   mac address     type    learn     age              ports ------+-----...

I totally wonder below a compatibility of the Nexus 7000 modules I have not found something related that   Can this hardware compatibility be OK? Q1) SUP2 + Fabric module 1 Q2) SUP2E + Fabric module 1 Q3) SUP1 + Fabric module 2 Q4) Fabric module 1 + ...

Hello guys :   If I apply the following Command "hardware qos ns-buffer-profile burst" on 2* C93128TX in a VPC Domain – Will this cause any business impact or disrupt the VPC Domain status ,will this also require a reboot.

I want to assign static ip address to a server without bothering dhcp server. Now I can see all of the users are using ip address 10.1.1.10 – 10.1.1.50. so I assign a static ip address 10.1.1.100 to the server, do you think if this is a normal way to...

I have upgraded my OS from 6.0(2)A8(4a) Kickstart and System both to 6.0(2)A8(9) then I copied 7.0(3)I7(4) OS and run install all nxos command to upgrade but the error shows up as incompatibility. Could anyone tell what will be the upgrade path to   ...

Is it possible to use Cisco 9k’s and VXLAN to communicate with VMware NSX/servers and allow VTEP between sites over the wide area where one site is using Cisco 9k’s communicating with a VWARE NSX/servers while the other site is only using VMware NSX/...

Hi! Faced the issue of 802.1ad support on N3K-C3524P-10GX, the software version of NXOS-9.2.1. Do they support this technology?