Data Center Switches

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Save 25% on Day-2 Operations Add-On License

 

Forum Posts

Dear All,One of my customer looking for top of rack (TOR switches ) Nexus Series. Their requirement is as below.Requirement==========10 GB ports x 6 ports ( SFP +)1 GB ports x 3 ports ( Copper SFP)I checked on nexus series but most of the switches pr...

Everything that you need to know for the Nexus vPC technology!http://www.firewall.cx/cisco-technical-knowledgebase/cisco-data-center/1208-nexus-vpc-configuration-design-operation-troubleshooting.html

Customer needs a solution for High availability enterprise backbone, where the following are proposed:Two NG firewalls are proposed in High Availability for network perimeter (Internet side)Two Nexus 9508 (each with 4 FM, 2 Sup, 9564TX and 9564PX lin...

Do you know if VXLAN can be used for Layer-2 connectivity between multiple data centers?  Most of all the documentation that i've come across is related to VxLAN w/in data centers; I have a customer inquiring if they can use VXLAN between (4) Data Ce...

dgowens by Level 4
  • 1501 Views
  • 1 replies
  • 1 Helpful votes

I am new to switch-profile on nexus, I am getting below error commands on one of the 5k pair.Error: Command is not mutually exclusiveI am able to remove and add commands to one box but not on the other, I would like to remove switch-profile,what will...

Hi all,I just got a hold of the newest version of VSUM 1.5.5 to our vSphere 6.0.0 environment. This all seemed great until I tried adding a physical host to the DVS. The issue experienced is the following:vSphere Web Client Home menue --> Cisco Virtu...

alex_aasen by Level 1
  • 302024 Views
  • 32 replies
  • 106 Helpful votes

I config N1kV in svs mode l3 using interface control0 and run in vlan 1, and application data vlan in vlan 11, when i config ERSPAN , source on VETH7 and destination is 192.168.1.1.12 , i create port-profile ERSPAN, and two vmkernel port on two ESXi....

fly by Level 2
  • 180718 Views
  • 1 replies
  • 0 Helpful votes

Hi Experts,I am getting huge number of discard error on N5K FC port,#  show interface fc 2/14 | i discard next 10fc2/14    1 minute input rate 79499000 bits/sec, 9937375 bytes/sec, 11328 frames/sec    1 minute output rate 1066255968 bits/sec, 1332819...