Data Center Switches

Hi,I am trying to setup VSM and VEM under one of our test setup environments and am facing communication issue between VSM and VEM. I have searched all over and have visited various links by users on this community too. Have tried a lot of stuff but ...

Hello GuysI have around 80 hosts and they will be distributed among 5 clusters in the same VCenter Datacenter, one of them will be used for Services, where we will have the Nexus 1000v, performance tools and so on...I read some documentations, but di...

We have a lab with 1000v and VSG trying to find ASA 1000v to add so we can get ahead of the curve for demo and PS activities.

We have 2 x VMware vCenter 5.x servers (one in each physical site). Site 1 vCenter manages our Production and Test environments (which are separate), and is implemented on a single vCentre Server, but has two vCenter data centres (Production and Test...

We're looking at deploying a VMware solution that incorporates the Nexus 1000V. The supplier has specified two Nexus 1010 appliances. Having not used the 1000V before, is this a very commonly implemented solution?I've been trying to find out why the ...

Existing installation of vSphere 4.1 with a UCS chassis and a 1000v switch.New installation of vSphere 5.What is the best/preferred method(s) of moving all the ESXi hosts (the 8 UCS blades) that all communicate with the 1000v from the vSphere 4 insta...

Hello, I recently was asked the following quesiton by my customer:"What is Cisco best practice for SPAN ports on VMWare envrionments?  As you know, we are running Nexus 1000v that allows for SPAN sessions.  However, my concern is that we will saturat...

I've been troubleshooting in a lab environment restoring a 1000v that will not allow the running-config to be copied 100% to the startup-config. This was a HA cluster and I've since resolved that and have the 1000v running in standalone mode. I've le...

What would the config of the Nexus 5000 look like with the example config given(see attached or below) in the 1000v Qos White Paper?version 4.2(1)SV1(4)class-map type queuing match-all vm_gold_classmatch cos 4class-map type queuing match-all vmotion_...

I have read the section on running VSM and VEM on same host within the N1KV config guide. However, I want to understand any other issues I should be aware of before placing this config into production? I.E shutting down host / cluster / VSM / vcentre...