Data Center Switches

Hi there,does anyone have experiences on running two Nexus 1010 appliances each in one  data center location for redundancy reasons?We are planning a Nexus 1000v Implementation for two data center's which are appr. 100km apart and couldn't find any i...

anyone can explain that please. thanks in advancehttp://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg_1overview.html

Hello there,I started deploying the Nexus 1000v to a 6 host cluster, all running vSphere 4.1 (vCenter and ESXi). The basic configuration, licensing etc is already completed, and so far no problems.My doubts are regarding the actual creation of system...

What is my Tacacs/aaa configuration missing?It never tries to authenticate to the serverI am running nexus-1000v-mz.4.0.4.SV1.3b.binaaa group server tacacs+ TacServer    use-vrf managementaaa authentication login default group TacServeraaa authentica...

Hi,I want to inspect packets on virtual ethernet of VM.port_group is Port group on cisco 1000v switch.Veth2 is virtual ethernet on virtual machine "esx - w2k3 ent sp2"Module 3 is a ESX where my VM is running.port-profile usage is as follows.port_grou...

Dear All,I had issue with nexus 1000 in vmware environment.If I try to ping gateway from one VM, it's fail. ping intra VM in different esx host is ok.could any one help me on this ?Br,Heri

Greetings all,i have a poblem when i clone VM, then appear an error messege that i att,  can i change change the maximum number of ports like on the vswitch? how many the maximum ports?thanks.br,Vendy

Dear All,I had problem in change speed and duplex setting on nexus 1000.By default, my N1K interface speed is 10 and duplex half. I had tried to change the speed and duplex manually, but when I do "show interface status" the speed and duplex still 10...

Greeting allI understand that the best practice for vmotion with n1kv is to create a separate port-profile type vethernet and with an access vlan same as my control/mgmg/packet and use it for my vmotionBut is it possible to have the vmotion via a dif...

Hi,As the title suggests really, I'm trying to find out what ports and/or protocols the redundancy services utilises when you have the active and standby VSMs on a network? On fixed configuration Nexus switches this is normally facilitated by EOBC, b...

Hi there,my problem is that when i migrate vms from the standard vswitch to the nexus 1000V, some of them are loosing connection but the ports are up in the nexus.other vms (in the same vlan) keep their connection after being migrated in the same por...

HelloI was able to find the Cisco PCI solutions PDF but it doesn't mention the N1010anyone has information regarding the Nexus1010 PCI compliance?thank you all in advance.

I'm planning an upgrade and want to see if my plan makes sense.Current Configuration:dedicated 32bit vCenter Server 4.0 running on Win2003R25x HP dual socket 6 core hosts running ESX 4.0 and 1000V 1.3aWhat I Want:dedicated 64bit vCenter Server 4.1 ru...

Hi,I have 2 questions regarding these VLANs:Question 1. I have a ESX with 6 NICs:- 2 for Service Console- 2 for VMs traffic- 2 for VMotion.Only the 2 NICs used for VM traffic wil configured as Uplinks in Nexus 1000v (the other 4 NICs will remain in t...

Hi Guys,This might sound like a stupid question but if you have your Nexus 1000v environment up and running, everything is going well but someone accidental deletes the ACTIVE vsm, how do you recover from that making sure that the new VSM you build w...