Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello, I am using Media Sense in my infra and looking after exactly how to identify Incoming and outgoing calls which got recorded. When i see the recording in my search and play list, I am unable to identify who has called in and who has called o...
I have a local network with 7 SG300-28PP 28-port Gigabit PoE+ Managed Switches and 1 SG500 24 port Gigabit PoE+ switch (main switch). One of the SG300 is having issues connecting Cisco IP Phones 7940 to the voice vlan. I have defined Vlan 2 as voice ...
Dear All, Any body can confirm that phone charging is possible with DX series phones. I have checked with DX70 and 80 but got message that this type of USB is disable by administrator. Any Advise BR
Hi,cucm , AC advance 10.5we have a sip trunk to integrate with other voip system we press 88 to access this system ,we created a local user for phones on this system so the operator can transfer to them , the issue:phone A in our system :100phone B i...
After upgrading my EX60 from 6.3.1 to 7.1.1 I now receive "Lost connection with control device" and the touch control panel sits in a spinning loop.I also reveive the following within the web management interface on the EX60:ERROR: Touch panel connec...
Hello, we would like to know if it's possible to add custom trusted CAs to the Cisco 7800/8800 IP Phones, to be connected over MRA. TIA and regards.
Hi, all!I have a questions about call recording solution for CUCM and CME. - Does Cisco Media Sense support call recording for Call Manager Express?- Will Media sense write all calls, including calls via PSTN to any DN, or only DN to DN calls?- Can i...
Hello, we have some Cisco UC 10.x/11.x infrastructures (CUCM, CUP, CUC, CUCCX, ...), and we would like to add the Expressway nodes to get MRA. We would like to know a feature comparison between the classic on-premises scenario and the new MRA scena...
Hello, I’m trying Jabber MRA, User can login internally without any issue. I have setup the Expressway C and E. traversal zone is active. And everything look OK as per the guide. The only thing that I have is my customer did not create the SRV re...
Hi, I need to upgrade vertual Telepresence server 4.1 to 4.3 , what is the procedure for upgrading? Thanks
Hi, Does Dialer interface support CEF switching in ISR platform 15.5M&T train ? In very old documents indicate dialer would not support CEF, but fast switching. I cannot find out latest update information in terms of this point on CCO now. Here I ca...
Helo all, Am getting lot of core dump alert from cucm and IMP.Is there any bug reported for this ? regards balaji
I have 8831s that I lend out on request. The first time I put these phones out to use they worked great - basically that was to test the phones and the jacks they would be connected to. Lately it seems that the phones take forever to register. From...
Hi Guys, I need to prefix a digit to redirecting number during call forwarding in an MGCP setup. Can someone please give me the exact steps to do the same. Regards, Gowrishankar
Hi All, I have been trying to upgrade Cisco 7960G phone from SCCP to SIP for some time now without luck. First of all, I cannot find an "unlock phone" option on my 7960G phone so I can't erase the existing configuration. There is no password set up. ...
