Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hello,Just wondering what people's thoughts are with using WAN Optimiation (such as Riverbed, Steelhead) with CUCM clustered across the WAN. I cant find any solid information stating to use it or not to use it with CUCM data between the servers in th...
Hi all.I see following SIP options call-flow for sip options ping:17907581: Jan 16 08:11:31.057: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:Received:OPTIONS sip:10.250.20.25:5060 SIP/2.0Via: SIP/2.0/UDP 10.11.3.17:9256;branch=z9hG4bKabuf3p5e3es57i595u...
I am experiencing call failures on outbound calls from the PBX with the following setup that I'm hoping someone may be able to help me with. Mitel 5000 PBX ==(pri)==>ISR Router ==(sip)==>CUBE==(sip)==>PSTN. The failure seems to happen at the ISR rout...
Hello to all, We are planning a Voice implementation in a small office, only 2 persons. We are thinking in Cisco 880VA ISR, because in specifications we saw that supports until 5 IP Phones. We want to know if this router have the same CME features as...
I currently have a acme packet facing verizon SIP cloud , and we been having some issues with the appliance and CUCM, i went online to there website and cant seem to find a tested configuration as far as SIP profile.We are contemplaing the idea of tr...
Hello,Anyone knows how to check the data when a ip phone 7960G restart?. Is there any report en RTMT?? Thanks
Hello,i think it is not supported yet. But maybe i did not find the correct informations. Am i right that actually only CUCM 8.6 is supported on UCS Express? Or is it possible to install newer Versions on these blades? Has anyone some documents about...
Hii have implemented a solution of IP telephony using CUCM 10.5 .Some users informed me that there is aleatory problem of call transfer between them concerning the external calli took two IP phones (9951) and i made 17 successive calls form Ip phone...
Hello,we use a Cisco 8851 Endpoint. I paired a iPhone 4S with the device. Everything is working fine.Is it possible:1. Selected primary internal line - Call iPhone contacts?2. Selected iPhone line - Doing calls with calling party as primary line when...
scenario: there is a main site and 2 remote branches of an Org.Question: in which situation will you put 3 separate CM clusters at all 3 sites AND in which situation will you put 1 CM cluster at main site and only the 'subscriber' at the other 2 remo...
Hi,I have a AS5350 with E1 2 PRI DFC on it. E1 line is terminated on the cisco AS5350 and then there is a trunk between this and an Asterisk server. The setup works fine and all incoming calls are forwarded to asterisk server and properly handled. Pr...
Hi,We have a lot of CP-7912G phones with SIP firmware and were used with Asterisk before. Now we have procured new CUCM 9.1 and trying to revert back those phones to SCCP. Looking at various other pages of this forum, we have found a way to prepare g...
Hi, I'm looking to implement CME 9.1 on Cisco 2951 at new office.Since there's Toshiba VoIP system in place at old office, we are migrating the whole ISDN channels to the new office and looking to set up a SIP trunk via P2P WAN link and route the cal...
HiWe notice in our cluster that, some 8945 sccp phones do not give MWI (LED as well as on screen) and also 9971 do not give MWI.Voicemail comes from cisco unity connection..And phones are registered on CUCM.Some 8945 even show DND key status when pre...
Hi,I'm planning to upgrade the MeetingPlace to CWMS. I'm afraid some user behavior of MeetingPlace is missing on CWMS, e.g. create the meeting by phone through CWMS, define the meeting ID from CWMS.Any one upgraded the MeetingPlace to CWMS? Any compl...
