Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
How I can do this without web page Admin Bulk Administration.I want to do this with SOAP?Can you provide me the plan how I can do this?What I should use?Please try to write your opinionThank you
I recently added a 7936 station to my UC500 installation. When I booted up the 7936 it downloaded new firmware then picked up an extension and can make and receive calls normally. However the strange thing is that the conference button only works t...
Hi All,I experienced problem with E1 R2, I configured it,the problem is:If I called a destination(mobile number) that has ring back tone(music ring back) the call failed, but if hasn't the call success .There is a problem in dealing with music ring...
I have SRST router , i need once incoming calls reach to FXO ports , ring group of extension at same time , it is like hunt group in call manager but i need the steps in SRST router configuration thanks
Quick questions chaps.I have CM 4.1 cluster with 5 sites, all site to site traffic break out at PSTN - no calls pass over the WAN. When I use extension mobility for user a at site a and got to site b and log into the phone (taking my number) when I p...
Hi,Currenlty we are running with UCM version 4.3 and the directory is integrated with Win 2K3, now customer is planning to migrate their directory to Windows 2008.Just wanted to know whether this would be supported or not.Kindly advise.
I have a client using CUCM 4.1.3 SR2. The cluster has a PUB, SUB1, SUB2.They have EM configured with the EM Service URL pointing to SUB2.But the EM service is not activated in both the SUB, its running only on the PUB. EM works all fine, user is able...
Hi, I am sure the answer is probably No, but does anyone know if it is possible to rerun the IPMA Wizard within CUCM7?I am happy to configure manually, but if this is possible it would be good to know.Many thanksSteve
I have an FXO port for a 1MB line on an H.323 gateway which forwards calls to a CUCM 6.0 server.FXO Config:voice-port 0/2/0 echo-cancel coverage 64 timing hookflash-out 50 connection plar 4488 description LINE FIVE caller-id enable Dial-peer config:d...
Hi guys,I have a customer who wants a prompt to be played saying " we are sorry we cannot connect your call please dial xxxx" during SRST mode.I believe all I need to d is to record the prompt and place in router flash and then reference it in my pa...
Using ccm 7.0. I want to be able to do a directory search for another cluster.Scenario.When a user presses the directories button I want them to see in the list 4 corporate Dir A5 corporate Dir Bas well as missed received and placed etc.I just want t...
Hey guys,Friday I was working on a particular phone, and was having problems. In total, we have 3 7916's going into service, 1 to 1 user, and 2 to the operator. Both the user and the operator are going to be using Cisco 7975 IP Phones. I connected...
I am trying to set up a third party Sip phone on call manager 6.x. it looks like the phone is talking to call manager because I am getting a Registration Rejected error in call manager but i don't konw how to firure out why it's being rejected. Is th...
Hi! I need your help regarding caller ID. When I called a DID->Nortel PBX->MGCP DSM-100 Gw->CUCM->Ip Phone, we see the caller ID. But when we called a DID who is answered by Octel, then transfert to an IP Phone trought the same MGCP DMS-100 Gw we see...
Can anybody out there tell me where in CM 6.1 I can list the extensions configured on over 60 VG224 voice gateways.If I do a search under Device>Phone> none of the configured extensions are displayed.
