Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi Guys, I have outgoing Voip dialpeer where i cannot remove prefix. But we can make translation rule to omit prefix like 9 and then add outbound DID for outgoing calls. Any idea/suggestion? dial-peer voice 2 voip description OUTGOING CALLS transla...
Hi I'm using a 2811 gateway with 15 fxo lines to connect my pbx to pstn. It works fine for 1 or 2 days and after that stops. when I enable "debug vpm signal" and "debug vpm error" this messages are logged when calling to fxo lines: Jun 18 05:59:25.86...
Hi All I have 3925E 15.6(3)M4, acting as a SBC and I wanted to add call tracking from the data I have the following accounting setup gw-accounting aaa acct-template callhistory-detail!gw-accounting syslog statsgw-accounting file primary ftp ipDDRES...
Hi Guys I would like know if the all voice gateway family 29xx have support to SIP SRST. If have are there any documentation about this? I read any documentation, but, not stay clear for me. Thanks, Regards, Wilson
Has anyone ever experienced where an imac is connected to the LAN port of a Cisco 7841 phone continually drops on the lan connection? We've tried hard-coding the lan port on the phone to 1000/full but even that does not seem to fix the issue permane...
Last night we attempted to migrate from a Verizon PRI to a Comcast PRI. Connecting to a 3925. Both services are identical from a configuration point of view. Both are NI2 Both are ESF Both are B8ZS Both are hdlc encap Both have D Channel on the 2...
Hi All, I'm currently working on a CUCM 11.x cluster that has a publisher and 3 call processing/TFTP subscriber servers. I've noticed that the publisher is running on a host using a 2.2Ghz CPU with an OVA configuration that supports 1,000 users (2v...
I am testing this setup in the lab and if it is successful I will deploy this in production. It looks like that the CUBE function is fine however not so much for the DSP configuration. First of all, is this setup supported? I know that that if CUB...
Hello Guys, One of our customers has been looking for ordering new licenses. I am assisting a colleague to locate the SKU for the licenses they want to order. I was not able to locate a link on Cisco site where I can find this information. request y...
We need to activate LSC for all Phones to do Authorization with 802.1X (ISE).We do not need it for other function only for 802.1X1. When we activate the CAPF service and install LSC on every Phone, can we get in trouble with other function(Device Sec...
Hi , Please help me to enable video calling on Cisco DX 80 . I have setup the devices and its registered with Call manager . It is on SIP .
Hi there, long time reader, first time poster for the Cisco community, and i'll admit my knowledge of voice is very limited, but i have come across a peculiar problem and am hoping for an easy answer. I've looked across the forums, but can't find too...
Hi We have CUCM 11.5 and exp-c&E 8.9 on production. We have installed Digicert pulic CA certificate on Expressway. We have also registered Cisco 8800 IP phone via MRA. (Through internet) But when we try to register SX20 through MRA (Internet), we are...
Experts, We have CCUM 10.5 in virtual environment installed on Cisco server. We also use informacast 9.0.2 but that separate topic. I wonder what and how would be upgrade to latest version which I believe 12 is. Can 11 be skipped? I have never done...
hello, I sometimes look at RTMT to troubleshoot numbers people dialed. I have very basic knowledge in this. When going into Real Time Data field under session trace log view, I see there is a "Calling DN", "Orig Called DN" and "Final Called DN". C...
