12-03-2017 06:24 AM - edited 03-17-2019 11:43 AM
Hello. Got fresh installed CUCM cluster with auto-reg on. New phone from the box got auto-registerd just fine, but if you delete it - it won't get back. You may register it manually and it will come back to work. Also, when i manually add them, i can see status Rejected untill they register back.
Any suggestions?
I've sniffed traffic and i see, that phone downloads files from TFTP, and even tries to register on CUCM via SIP with AUTO-REG username, but gets 404 not found error.
Solved! Go to Solution.
12-03-2017 09:26 PM
found it myself
Whenever new phone registers, new "Phone button template" created. I had to delete it too, otherwise auto-register process cannot insert new template again, because there is one with the same name. I suggest it's a flaw in the code. CM should use existing template in that case, create new with different name or simply overwrite it.
12-03-2017 09:26 PM
found it myself
Whenever new phone registers, new "Phone button template" created. I had to delete it too, otherwise auto-register process cannot insert new template again, because there is one with the same name. I suggest it's a flaw in the code. CM should use existing template in that case, create new with different name or simply overwrite it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide