Hi,I just wanted to clarify the max concurrent session count for the ISE 2.1 PSN running on a SNS 3595. Is it 40,000 concurrent sessions or 20,000? Is that conditional to the way the PAN and MNT are deployed i.e Medium/Large Deployment?ThanksNadeem
Hi,I just wanted to clarify the max concurrent session count for the ISE 2.1 PSN running on a SNS 3595. Is it 40,000 concurrent sessions or 20,000? Is that conditional to the way the PAN and MNT are deployed i.e Medium/Large Deployment?ThanksNadeem
I'm helping a customer with the Guest API and I see two different behaviors on username selection policy that I cannot understand how to configure.Using the POST method to generate a new Guest user, the username I got from ISE was derived from First ...
Hi,Are there any published best practices documents or guides for performing Cisco Device Administration against ISE via RADIUS in an F5 LB setup? Have searched around with no luck so far... The current F5 & ISE deployment guide covers network acces...
Hi everyone, We're using the APIC-EM in our environment and that involves ssh connections to all our devices every 30 minutes. The configuration related traps/events strains certain monitoring systems of ours, including Cisco ACS remote syslog serve...
In our clients environment we are using an external AD to authenticate wireless clients from a 1.2.1 ISE server; On a number of occasions some of our clients have been unable to login to the wireless network but later on it seams to resolve. Upon che...
We have a deployment with multiple PSN nodes. When the primary PSN is made down, NAC agent doesn't behave as expected. Both PSN nodes are added in the radius configurations of SW / WLC. Redirect ACL are symmetrical for both PSN nodes. Any clue on...
All I am using a ACS with version (5.5.0.46.8). There is a group within the enterprise that is requesting RO access to the ACS. This group is already created in the User's and Identity Stores/EXTERNAL/AD/Directory Groups Under the Policy Elements/D...
Dear all,My customer is asking if they can use ISE for posture assessment and enforce below.- Check local firewall status (or enable it if necessary)Using WMI script? Do we have any sample script?- Disable wifiUsing WMI script? Any sample ...
Without a Pre-Auth ACL, dynamic VLAN push and DHCP play nicely togetherWith a Pre-Auth ACL allowing DHCP, the dynamic VLAN push works OK but the devices don’t re-DHCP.So is a configuration with a port-based Pre-Auth ACL that allows DHCP and a subsequ...
1. Where does the endpoint certificate store if it is issued by ISE? (PSN/ADMIN node)2. What is the maximum number of certificate can be stored in ISE node group/per PSN?3. What can be done if the number of endpoint certificate reach maxi...
Hi all,I am working with ACS 5.2 and using Radius authentication for vpn client.The authentication method used is Active Directory in an Windows enviroment with multiple domains in the same forest.My problem occurs when i change a user from one group...
We have a customer that bought 2 x SNS-3595-ACS-K9. The partner is now going to deploy ISE and are realizing that the wrong 3595’s were ordered. Is there any way to convert the ACS software/license to ISE? Or do we have to RMA and re-order. Challenge...
Hello, I have an issue with ISE 1.4. We have added a connection to our Active Directory, targeting Domain Users, such that any valid AD user can be a sponsor on the sponsor portal. We have also enabled auto-sponsoring, such that a Guest can provide a...
Hi Guys, I have ISE 1.2 primary and secondary setup. NAC agent is working fine on the primary but as a test when I take the primary down to check if secondary will take over, NAC agent doesn't pop up at all. I did some troubleshooting:- HA setup is f...
Hello, Before setting the 802.1x with ISE.The user logon with a script for mapping the network drive. We deployed the 802.1x with ip phone and PC successfully, however the logon script is not working now. Any required step to make the logon script w...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-01-2024 12:00 AM | ||
04-30-2024 11:03 PM | ||
04-18-2024 08:46 AM | ||
04-18-2024 02:57 AM | ||
04-02-2024 12:38 AM |
User | Count |
---|---|
6 | |
6 | |
5 | |
1 | |
1 |