Network Access Control

Have a retail customer in the middle of an ISE deployment w/AnyConnect NAM.  Their current retail workflow utilizes Microsoft’s fast user switching to allow them to move quickly between open applications and users.  As the documentation states, the A...

ISE BU,I have a customer that wants to migrate from older ACS 4.1 appliance to new ACS virtual appliance.I want to migrate them to ISE 2.x instead.The issue is they run the largest outdoor wireless network (in Sugarcane fields) from a vendor called M...

Dear folks,When we have 1 x PAN and 1 x MuT with 3415/3515 appliance,How many PSNs we can deploy?I've looked through many documents, but I only can see the sizing with SNS3495/3595.Jina

on ISE 2.0, I have configured some devices and created a Device Group called “Cisco Switch”On my  Tacacs Policy set I  have created a Policy to match on “Any Device Groups”If I try and log onto the Cisco Switch it doesn’t match the Tacacs rule. If I ...

If I am changing my authorizations policies on an ISE, and I want to apply them straight away to already connected endpoint/users in a production environment, what is the best policy? Assuming I cannot send CoA to every client connected one by one.Th...

Hi teamFor management integration preparation, a customer asks for new OID’s of the two appliance (SNS-3515, SNS-3595). Could you please provide this information in advance?Thank you,Chrigi

Hi all, I've been tasked with setting up ACS 5.6 to be able to authorize MS domain security groups members to have specific command access to our equipment. I've got the domain association and groups added, I have an Access Policy with a rule that is...

We have the following configuration on our switches: username xxxxxxxx privilege 15 password 7 xxxxxxxxxxxxxxxxx aaa authentication login default group tacacs+ local enableaaa authentication login no_tacacs enableaaa authentication enable default gro...