Hi,has anybody experience with pulling data from ISE using scp?I receive: Error getting tty, exitingfrom a UnixServer I doscp -vv admin@10.10.10.10:disk:/localRepo/PolicyConfig_Jun_22_2020_12_30_PM.xml ...debug1: Authentication succeeded (password)...
This community is for technical, feature, configuration and deployment questions.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
For production deployment issues, please contact the TAC! We will not comment or assist with your TAC case in these forums.
Please see How to Ask the Community for Help for other best practices.
Forum Posts
Resolved! WLAN Controller & IS compatibility
Hi All, I'm trying to see if our wlan controllers air-ct5508-k9 are supported with cisco ise version 2.6. I checked the compatibility matrix but its confusing, we're on version 8.3.143.0, the matrix only lists 8.3.140.0 as supported but I don't even ...
Hi,I deployed virtual ISE 2.6 and did the initial setup.During setup I had to define a password.After the setup, I logged into webinterface. Manual says that I will be asked to change the password, but I wasn't.So I went to Administration -> Admin Ac...
Hello there! I have a tacacs+ server running on ise and my policies are running without issue. We have integrated our ASA 5508 and to access it, we only use the enable password.My question is, is it possible to use the enable password instead of loca...
Resolved! ISE and Aerohive for BYOB use case
Has anyone tested ISE with Aerohive wireless specifically for BYOB?
Hi everyone!Im having a requirement from our customer that need to have the following features for controlling their internal customers Internet access:Have the ability to:- Give users a Guest Account with x hours of Internet Access and that they can...
Hi, I need your help in solving the problem. A couple of days ago I noticed that ISE began to respond longer than usual. I tried to log in via the CLI and got the message "% Error: Unable to launch ADE-OS shell. Disk full.". I read the Internet and f...
Hi all,I was wondering if there is a way to actually change the base license in an ACS deployment. I know this isn't the recommended approach to accomplish what I wanted to do but I'd appreciate if someone could tell me how to do it if possible.I nee...
Is there a field in ISE that indicates a network device (under Administration->Network Resources->Network Devices) is active or not? Right now, I am pulling the complete list of network devices, via REST API get's. Blindly, meaning everything under...
Resolved! ISE 2.6 - Certificet doesn't update
Hello So on our Guest Protal we are runing a Cert, and we just updated it. If you go to Administration -> Certificates -> System Certificets and see it there. But if you as a guest client access our portal you will see the old Certificet i have reb...
Complicated (to me) question - due possibly to me not knowing the solution well enough: we have a customer with a sizable Citrix infrastructure. They are allowing clients' connection to the XenDesktop infrastructure via public interface through a Net...
Hi Guys,I want to forward Cisco ISE authentication logging to Splunk. The goal is to capture the authentication success from endpoints to ISE.So far I already configured the Splunk IP and port on Remote Logging Targets and added it on AAA Audit's Tar...
Resolved! TACACS Remote-address condition
With most of our users working from home ourselves included, we are using AnyConnect to access resources on the network. We have a privileged user profile and regular user profile. The privileged profile receives a different IP address from a differe...
We have been live for about 3 weeks with ISE 2.4 using RADIUS authentication on our production wireless network. On Monday we started getting "No Data available" in Home>System Summary. Even though authentications appear to still be working, the RADI...
Hello,When configuring e-mail alerts, is it possible to always know which appliance in a distributed deployment is sending the alarm alert?I understand that all appliances send e-mail alerts, but it is the MnT that sends the alarm e-mails and will us...
