With ISE setup in a distributed deployment, there are PSNs deployed locally to specific locations. In order to point traffic from a particular location to its local PSN, it's my understanding that this can be accomplished by configuring the local NAD...
Hi, please any assistant to push ISE to use the configured NTP server instead of the local one?
Hello I have a Cisco ISE 2.6 installation and I need 15K Plus license, does anyone know if I can buy two licenses (10K + 5K)?In particular the licenses are:E2SC-P-ISEP10KAndE2SC-P-ISEP5K Thanks!
Hello, Any help on this one? I am testing Redirect URL/ACL from ISE to the WLCv for open guest portal access, so the user is authenticated on the portal.The user is able to connect to the wireless network, receives IP from DHCP server, but is not red...
Hi Guys, I've an ISE Deployment with 4 nodes node 1 is the primary admin and secondary mnt node node 2 is the secondary admin and primary mnt node node 3 and 4 are PSN only nodes We need to deploy Sponsor portal in this environment and by default I...
Hi Team, I would like to check if ISE guest portal supports the following: At the guest WIFI portal, customer looking at a text box to enter sponsor name.Once the sponsor’s name is partially typed, the text box will populate "possible" sponsor's ...
After some difficulties, finally managed to get a publicly signed wildcard cert. DigiCert was unable to issue a cert, so ended up with Sectigo (formerly known as COMODO).For CSR, used a generic name for CN 'ise.ise.xyz.app', and the SAN DNS has this ...
Hi.As the title say, I have enabled 802.1x (and MAB) via 3CPL and policies on a switchport, and it works fine.Until the computer falls asleep.Then the switchport starts to generate error logs like this:Jan 22 14:16:34.492: %SESSION_MGR-5-FAIL: Switch...
When implementing inline tagging on Cisco 3850/4500/9300/9400 switches - adding the propagate sgt command to the uplink interface - I know I have heard this but having an issue finding the documentation - but don't i need to increase the MTU on the s...
How can we set a WLC, configured with multiple WLANs, to use a single same IP address when authenticating 1X clients, regardless of which WLAN the request is coming from? As a parallel, in the Wired world, on a Catalyst switch we can type the command...
Hi,Is it possible to restore a backup from a version 2.2 ISE to a Version 2.6? Or would I neet to upgrade the 2.2 VM/Appliance?
Hello ,I have a customer affected by the following bug:https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvs67071/?rfs=iqvredAccording to the note, there aren't any fix published yet.Are there any workaround to fix this problem until a Fix would be pub...
I'm using the ISE API and looking at the documentation for UPDATE queries, I see that the best practice is to try and send "full objects". Currently, I am using the InternalUser endpoint and first I am getting back the full details of a specific use...
Hi All, We have and LDAP integration with ISE and are using the Anyconnect NAM module and profile on Windows machines for EAP GTC authentication.Since NAM is not supported for MAC OS and Linux, how can we achieve EAP GTC authentication on MAC OS and ...
Is there way to check against a local WSUS server for determining if an endpoint is up-to-date? I have a situation where corporate endpoints typically don't have the absolute latest windows patch, and is intentionally left out of WSUS for a period be...
