ā01-18-2018 04:44 PM
Can we use the ISE 2.0: Certificate Provisioning Portal and act as the SCEP server for the Cisco IP phones like 8821?
ISE 2.0: Certificate Provisioning Portal - Cisco
I can see that 8821 IP phones can be setup for the SCEP server.
+++++++++++++++++++++++
See the below
+++++++++++++++++++++++
You must configure the following SCEP parameters on your phone web page
The Cisco IOS Registration Authority (RA) serves as a proxy to the SCEP server. The SCEP client on the phone use the parameters that are downloaded from Cisco Unified Communication Manager. After you configure the parameters, the phone sends aSCEP getcsrequest to the RA and the root CA certificate is validated using the defined fingerprint.
Procedure
+++++++++++++++++++++++
i do see the following ENH request;
CSCve71881 ENH: ISE2.0 (no BYOD) to provision SCEP client in ip phone like 8821
Do we have any road-map for this?
Solved! Go to Solution.
ā01-19-2018 05:55 PM
ISE Internal CA is only for BYOD and manual provisioning via certificate portal currently. For roadmap request/questions, please reach out to the local Cisco Sales team so they can reach out to the PM.
ā01-19-2018 08:38 AM
Mubasher,
I'd suggest you post your question to the Identity Services Engine (ISE) community since this is general ISE feature and not a Developer/API software integration topic. The TMEs will be able to answer your questions there.
ā01-19-2018 05:05 PM
Any reply on the above question?
ā01-19-2018 05:55 PM
ISE Internal CA is only for BYOD and manual provisioning via certificate portal currently. For roadmap request/questions, please reach out to the local Cisco Sales team so they can reach out to the PM.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide