ā07-27-2017 12:40 PM
Hello,
I was checking the new Wireless Setup Wizard in ISE 2.2 and it seems very useful. I saw a few videos in youtube about how to run the setup and it is very simple but I have a question since everything seems to indicate that this works fine on new installations of ISE and WLCs.
Can this run on scenarios where ISE and the WLC already has some configuration? In my case ISE is already connected to the AD and the WLC. I already configured the Radius servers in WLC.
Will my existing configuration will cause issues or will it break things?
Thanks
Solved! Go to Solution.
ā07-27-2017 12:44 PM
The product is in BETA so there are issues with how it works.
Please check out the info below and read over the gotchas in the admin guide. There is one that talks about AD.
Cisco ISE Secure Access Wizard (SAW) - Guest, BYOD and Secure Access in Minutes!
ā07-27-2017 12:44 PM
The product is in BETA so there are issues with how it works.
Please check out the info below and read over the gotchas in the admin guide. There is one that talks about AD.
Cisco ISE Secure Access Wizard (SAW) - Guest, BYOD and Secure Access in Minutes!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide