ISE posture on Tellabs OLAN

[misinsuan2229]

Hi All,

Is there any documentation or config guide how to configure ISE posture for Tellabs?

Thinking if I could implement Web-redirection and DACL on the Tellabs just like on Cisco Devices utilizing ISE posture.

[Surendra]

As per this https://community.cisco.com/t5/security-documents/tellabs-wired-nad-config-pdf/ta-p/3653500 apparently you can. But it does really have any steps to perform posture in specific though. @david.wisnoski can probably help you there i guess. If not, Tellabs should be able to help you with integration.

[david.wisnoski · Accepted solution]

Tellabs does support wired URL Redirect for Posture for Session:PostureStatus Unknown, NonCompliant and Compliant endpoints. Three Authorization Rules would be configured, each with a unique Authorization Condition (Authorization Compound Condition indirectly referencing a Posture Policy AND Session:PostureStatus EQUAL xyz) and Authorization Permission/Result (Authorization Profile with Radius:Filter-Id for VLAN and ACL) to support the three Posture Status'.

[misinsuan2229]

Thanks Davic - we are thinking Implementing DACL for posture status (Unknown, Non-compliant, compliant). Glad that you confirm this is possible with integrating to Tellabs.