02-18-2018 09:40 PM
Hi,
Can I enable pxGrid service on a node that runs policy service node in Large Network Deployments? Or pxGrid also should be dedicated node?
Solved! Go to Solution.
02-18-2018 10:48 PM
Hi Satoshi,
you can enable PxGrid on a PSN node as well.
But if you have more PxGrid clients subscribing to session information and other topics, you can consider to have a dedicated node for PxGrid.
Scalability numbers for PxGrid can be found here - https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/install_guide/b_ise_InstallationGuide23/b_ise_InstallationGuide23…
Thanks,
Nidhi
02-18-2018 10:48 PM
Hi Satoshi,
you can enable PxGrid on a PSN node as well.
But if you have more PxGrid clients subscribing to session information and other topics, you can consider to have a dedicated node for PxGrid.
Scalability numbers for PxGrid can be found here - https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/install_guide/b_ise_InstallationGuide23/b_ise_InstallationGuide23…
Thanks,
Nidhi
02-20-2018 11:22 AM
The following table depicts supported (QA tested) deployment models for pxGrid: ISE Performance & Scale
PXG and PSN can only be co-resident in Small/Standalone deployment. Would it work if enable both on same node? Possibly/Likely, but not officially supported and we have no performance data for such designs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide