09-11-2017 05:26 AM
So, I have an odd issue. ISE is not tallying licensing and apparently it has not been for about a week.I'm hoping I can just restart something without having to reboot the system.
Solved! Go to Solution.
09-11-2017 08:37 PM
This is not a known issue in ISE 2.3, while CSCuz53660 is a known issue is in ISE 2.1.
If you are using smart licensing, I found a previous TAC case on ISE 2.2 resolved
... by switching to traditional licensing, deleting the Eval Licenses, and then enabling Smart Licensing again.
Please engage Cisco TAC to debug it further.
09-11-2017 05:43 AM
I've tried application start ise, but that didn't seem to restart it.
Version is 2.3
09-11-2017 12:59 PM
Hi Dustin,
Have you tried different browsers and problem is the same?. Not suggesting it is browser related but wanted to make sure it is not related to browser compatibility.
Cisco Identity Services Engine Network Component Compatibility, Release 2.2 - Cisco
Are you saying you have active users in the network using ISE?
Please visit the ordering guide to see how ISE consumes licenses.
Thanks
Krishnan
09-11-2017 01:06 PM
Usually use chrome, but firefox doesn't work either.
We do use ISE for wireless and starting to use for wired. Plan should only use base licenses on wired, but can't tell since I can't see usage.
Mainly trying to see what it uses vs what the doc says it will use so we order correctly.
09-11-2017 08:37 PM
This is not a known issue in ISE 2.3, while CSCuz53660 is a known issue is in ISE 2.1.
If you are using smart licensing, I found a previous TAC case on ISE 2.2 resolved
... by switching to traditional licensing, deleting the Eval Licenses, and then enabling Smart Licensing again.
Please engage Cisco TAC to debug it further.
09-12-2017 06:12 AM
Thanks, I do have a TAC open, just thought I may find an answer here sometimes.
We are using traditional licensing.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide