ā01-30-2017 11:15 PM
Hi,
I am looking a solution for AAA Tacacs+ server.
We need to comman authentication, Authorization and Accounting with Cisco, HP and Juniper devices.
We need per user / ip level restrictions.
I have tried with free Tacacs+ server but my authorization part is not working properly.
is the Cisco ISE will fulfill the requirement.
I have 500+ devices and the requirement is for DATA CENTER.
Regards,
Prem Vishwakartma
Solved! Go to Solution.
ā01-31-2017 12:02 PM
Hi Prem,
Yes. ISE will work with third party vendors as well.
Please look at the ISE device administration community site for further details.
ISE Device Administration (TACACS+)
ISE Design & Integration Guides will give you information on the all the design and implementation aspects.
We also have a ISE POV and you can take advantage of this if you are a partner that supports TACACS+ use case to show case for demonstration.
Thanks
Krishnan
ā01-31-2017 12:02 PM
Hi Prem,
Yes. ISE will work with third party vendors as well.
Please look at the ISE device administration community site for further details.
ISE Device Administration (TACACS+)
ISE Design & Integration Guides will give you information on the all the design and implementation aspects.
We also have a ISE POV and you can take advantage of this if you are a partner that supports TACACS+ use case to show case for demonstration.
Thanks
Krishnan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide