I have successfully set up hundreds of GRE tunnels and run EIGRP. I replaced a 7200 router with a 4500. The EIGRP neighbors will not come up. I can ping from physical interface to physical interface and from tunnel interface to tunnel interface. ...
Since I istalled the last patch LMS 2.5.1 December 2005, i coul not received email alerts from DFM module, before that it was working fine, I check on alert and activities window and appear many alarms and on configurations all the parameters are wel...
ANI seems to have trouble discovering 2 particular msfcs amongst about 20 that are being discovered properly. All pertinent configs are identical between the 20 msfcs that are OK and the 2 that are not (i.e. cdp & snmp enabled).A couple of difference...
I've installed DFM 2.0 and Common Services 3.0 on a windows 2k server with sp4. I unregistered the daemons and then tried to re-register them according to the Install pdf. I've attached the error that I get. Has anyone seen this before? TIA
I am try to set up a reverse telnet seesion between AUX port of 3725 Router to the console port of a master switch in a 3750 Stack configuration. The configuration on the AUX port is as follows:line aux 0 exec-timeout 20 0 no exec transport preferre...
Using LMS 2.5.1 on Windows 2003. I can no longer successfully use Netconfig to deploy device changes. When I run Netconfig jobs the jobs end immediately with a status of successful. However the job doesn't actually do anything. I don't even get an em...
the link is http://server/CVng/chassis.do?action=-1It no longer includes port 1741. The link bellow does work.http://sv3186:1741/CVng/chassis.do?action=-1. This is the only link I see and issue with.
Hi,Would anyone knows how frequency the netflow message send out from Cisco router ? I thought it depends on the router internal mechanism, anyone would explain it if has ?Thanks a lot!!
Hello,Is there a (easy) way to gather the sysuptime of all the devices which are in the RME inventory.The sysuptime is shown in the detailed device report, but i don't want all the information. Just the sysuptime.We are using RME 4.0.3 and i guess wh...
I've spend quite a bit of time setting up groups in Common Services, Campus and DFM . I now find that I have a corruption problably in the cmf database.Is there a way to save the defined groups?They are rule based and I have no problem redoing just t...
Hi expert,Please help on the LMS 2.5 can't login, it show that the cookies is disable but we have enable all the cookies in IE6. How to resolve this?Thank you.Rgds,Au Yeong
How do i monitor the service/process/file in Ciscoworks LMS 2.5 in Solaris to monitor the application is running?I know we can monitor from the web/GUI interface and check the process status.Can we monitor it without going to the web gui?Thanks.
