Network Management

Hi!When i try add new device in Prime 1.3 I get the following message:Add Device xx.xx.xx.xx Creation Failed. IP Address is not unique. Address exist as an interface-INVENTORY_SERVICE_110 but this address *is unique*, this address is not exist in Pri...

Hi, I'm reading the ifXTable with SNMP on a 7600.  If I configure a VIEW to exclude the entries I don't care about  within the ifXTable, am I achieving any efficiencies from the routers point of view ?  In other words,  does the 7600 still build the ...

I am setting up a cisco 3750 with aaa authentication along with a username and password for local access.  I just realized that my LMS will fail when performing a sync archive.  Reason for failure is TELNET: Failed to establish TELNET connection to x...

Question about licensing Prime Infrastructure 2.0 (a license PI upgrade, in particular my case, includes a license for LMS, NCS, NCS WAN, all at 1.5K devices) already installed a license for PI2.0 - NCS + NCSWAN (in amount of 3.0K devices); LMS has b...

We use PI 2.0 physical appliance.                Is it possible to save a shadow copy of the configs so that you get config in filesystem? We want to save the configs to an external server.  Actually we are using this feature in LMS.Regards

Hi,What will be the best tool to use in order to better correlate log of Cisco devices such as Switches, Routers and ASA ?Regards

We've integrated SG300-10 into Cisco Prime. The only things I can see, are the following: "Operate.Device Work Center.Device Details.System.Summary" and "Operate.Device Work Center.Device Details.Interface". Is there anybody, doing other things with ...

Hi,I'm having problem getting the Prime Infrastructure 2.0 to login with SSH to a Nexus 5548 to do an inventory. I get "Wrong Telnet/SSH credentials". But when I use the same credentials from another SSH-client it works fine. I also tested to SSH fro...

Almost none of our 350 switches shows up in Prime 2.0 with correct "Device Uptime". Just random days, hours and minutes. Applies to both the Device Uptime Dashlet and the Device Details in Workcenter.Anyone else who knows why or has a solution?

My experience with this has been bad on an EPIC scale.  In the amount of time I've dumped into trying to get Prime Infrastructure to gather the configurations from the switches it found during discovery, I could have logged into each switch via putty...

Does anyone have or know how to write a template to upgrade a mixed stack of 3750 switches in Prime Infrastructure 2.0?  Prime does not support upgrading a mixed stack yet, but it can be done from command line.the command line would be:archive downlo...

Hello everyone,we are facing the following issue: the SNMP poll is showing wrong values for ciscoEnvMonSupplyStatus when at the same time the "show env all" shows that there is nothing wrong with the power supplies. Here is the example:ciscoEnvMonSup...

Greetings...I'm hoping I have this issued hammered out already...I'm thinking it's an IOS version issue. We are monitoring our routers, switches and ASAs using Nagios.  We have six 6500 series switches that are not returning SMTP data to the Nagios s...