04-05-2024 12:56 PM
I have an ASA 5520 ver. 8.0(4) and ASDM 6.4
I'm configuring a lab and I want to be able to ping from a L3 cisco switch connected to the inside interface thru the ASA to a L3 switch connected to the outside interface. I want to get to the directly connected infterfaces. How could I do this? I'd like the ASA to be wide open and then add the rules. This is for a lab I'm setting up at work.
Solved! Go to Solution.
04-05-2024 01:03 PM
Access-list extended ALL permit ip any any
Access-group ALL in interface in
Note:- config secuirty level of Inside to be higher than Outside.
Note:- you need icmp inspection also under policy map
MHM
04-05-2024 01:03 PM
Access-list extended ALL permit ip any any
Access-group ALL in interface in
Note:- config secuirty level of Inside to be higher than Outside.
Note:- you need icmp inspection also under policy map
MHM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide