ASA 5510 CUSTOM MANAGEMENT INTERFACE CONFIGURATION

[tommy.peralt1]

Hi, I don't want to use the default management interface configuration of my ASA5510 firewall. Can anybody share their ASA5510 management interface configuration for a home network. I appreciate your support in sharing your configuration. Thanks!

[Karsten Iwen]

In a home- and SMB-network, the Mgmt-Interface is typically not used and the ASA is managed inline through the inside interface. What exactly do you want to achieve?

[Marius Gunnerud]

If you want to use a different interface, that is not the mgmt interface, purely for management then just add the command management-only on that interface.  Once you add this command the interface will not allow transit traffic until you remove it.