Network Security

Firepower Management Center 6.2.2 is extremely slow to respond. Server is running on VMware vSphere 6.0 & ESXi. Here is the TOP information from the server:top - 12:55:06 up 67 days, 20:23,  1 user,  load average: 0.57, 0.45, 0.46Tasks: 119 total,   ...

Hello All,   Currently we have a customer who has SourceFire v4.10 and would like to configure the SourceFire devices to send syslog alerts to a syslog server. I have checked the Advanced Settings of the IPS Policy and there is no option to define if...

Hi, I don't want to use the default management interface configuration of my ASA5510 firewall. Can anybody share their ASA5510 management interface configuration for a home network. I appreciate your support in sharing your configuration. Thanks!

hi i recently purchased an asa 5510 i can ping the internet from asa but not from my laptop when connected though the firewall my laptop gets an ip and default dns AND gateway from laptop i can only ping firewall inside interface can you help me diag...

Hello All,   I am using Cisco ASA 5506X in production. Our ISP is AT&T DSL internet services. We have used a DSL modem and this modem is in a bridge mode. This internet works based on PPPoE with PAP authentication. We have been given username and pas...

which of these lldp commands are valid    1.show lldp 2.show lldp intercace fa 0/0 3.show lldp traffic 4.show lldp neighbours 5.show lldp neighbours detail 6.show lldp entry R1  

Hello Friends,   I'm stuck in a problem where need your suggestion.   I have ASA 5555X (9.6.(3)8) with Sourcefire services (6.2.2) running in HA. I have implemented Passive authentication and Active authentication as a fallback of Passive for all my ...

Hey guys,   I need to migrate 15 5506-X from FMCv to FMC 2500. What is the best way to accomplish this smoothly?   - Backup from FMCv and Restore on FMC 2500 is possible? - The existing 5506-X must be resync like was new? - What about the licenses?  ...

Hello,I'm trying to configure PAT on ASA 5506-X (ASA version 9.8(1), ASDM version 7.8(1).With the current configuration I'm able to go from inside networks to outside, but I need to connected internal hosts from outside (wan interface, in my case).Fo...

Hi,   I have a problem with redirecting to captive portal.Everythung is ok for some sites (for example ya.ru), but doesn't work mor many others (for example webplay.pro). What might be a reason?

Cisco ASA 5505 outside interface connected to Verizon wireless modem gives IP with 255.255.255.255 mask. inside 192.168.2.1/24 outside 166.155.0.20/32   it creates automatic route ip d*   0.0.0.0 0.0.0.0 [1/0] via 166.155.0.20, outside     Should ASA...