Hi Experts, Can we make sub interface on Cisco ASA 5505 model and if its possible then do that interface need to be upgraded into Trunk Port. Pls explain briefly. Thanks
Hi all, I'm trying to configure IPv6 policy map in my Cisco PIX 515e 8.0(4). The guide says:policy-map type inspect ipv6 nameciscoasa(config)# policy-map type inspect ipv6 ipv6-map But I don't have that option in my CLI PIX5151e(config)# policy-map ...
Can anyone suggest on the below.I've a special requirement of implementing a separate physical interface for management on the newly added contexts. I understand we can allocate the same physical interface(which is connected to an access port) to mul...
We're having an issue with a server behind an ASA 5505 not being able to access SOME https websites, for example, https://cloudcare.avg.com.We have moved the server directly to the WAN and can access the website there so we believe this to be an ASA ...
Hello Folks, Anyone know if memory of a flash on ASA 5520 completely dead should I see anything when I'm connecting to console port ? (at least initial boot message?). I have a unit it looks ok but zero output via console. Tried all speed setting sa...
Can ASA with FirePower services inspect SSL traffic or we need SSL inspection appliance.How can ASA force Application Control for SSL. Let say, allow only reading of Social Networking while bloking upload/post if not be able to see inside SSL?
We're using a virtual ISE, which I have now added to Prime.First thing: Device type is set to 'unsupported Cisco Device' - but Prime 2.2 is supporting ISE 1.2.x isn't it.Anyway.. CLI and GUI Credentials are set correctly but after synchronizing it sa...
We have a pair of 5515 in active/failover. There is a subinterface inside interface which on the primary ASA shows as Normal, but failed on the Standby. From 'show failover' commandIf we access the standby ASA and run the 'show failover' command the...
I'm working to set up Citrix netscalers with global server load balancing (gslb) across two different locations. The default config on the netscalers when completed makes the two talk to each other over the internet over port TCP 3011. When you cho...
Hi all, What is role of Sourcefire User Agent on Active Directory,(is it required?) When we connect Sourcefire defense center to AD, we need to create LDAP Connection what exactly Ldap does in this Scenario Confusion between Defense center vs firepo...
I have the SFUA 2.2 agent installed on a Server2012R2 DC. I am able to see login and logoff events in Event Viewer on that server for my AD account.Everything looks good in the Agent UI and the I do not notice any errors in the logs. Also I can telne...
It appears that if I block a URL that is reached only via HTTPS (Facebook in this case) I cannot display an HTTP response that informs the user as to what happened, they just get a connection reset error. Is that a limitation of the URL filter or do ...
OK, this one has me stumped. Trying to connect the client to work spaces, it needs access to port 4172 for TCP and UDP. I have the Inside ACL allowing access to 4172, I see hits, I see the packet come in, but thats it. I can't see if it is transla...
