Network Security

Here is the scenerio.  I have a client who is sharing internet with another party who is in the same building as they are through my clients ASA 5505.  I have configured Port 1 and 7 to "switchport access vlan2".  There is a sonic firewall that I do ...

So, I can get access to the internet from the ASA 5510 itself and that is confirmed via pings. However, anything behind the ASA does not have internet access, on any VLAN/sub-interface. I've attached my running-config. Any help would be appreciated. ...

Hi,we have a customer with 2 x ASA5510-SEC-BUN-K9 running in an active/active HA mode.On the primary ASA he has 25 SSL premium licenses, but on the secondary ASA he has only 10 SSL licenses.Is there a need that both ASA´s has the same kind of license...

Hi,We are having some issues with our Cisco ASA 5505 unit, it intermittently drops the outside interface connection. Internally the network appears to be working correctly with no issues. Even though the outside interface indicates it is 'up' access ...

Greetings all. Having an issue setting up a new ASA5512X, 9.0. Outside interface is a /30 to the ISP. Inside is /30 to a Cat4500 switch. Have a few web servers inside that need to be accessible from outside. Attempting to static NAT the servers to pu...

We have an ASA 5510 and have setup the typical 1-to-1 static NAT addressing to multiple virtual machines.  I have an accesss list for the outside interface to allow icmp traffic in.  What happens is it will ping an address but it is very intermittent...

                   Hi GuysToday we tried to convert 15 contexts sitting on a legacy 6509 with Sup2 running a FWSM to a new ASA SM sitting in a 6509E with a Sup2T. Trying to get the conversion to work took several attempts but when we did finally get ...

Hello everybody,i am so confused about the new changes from de command lines in ASA ver 7.2 to 8.6in some cases i've found some tools to translate NAT, for example:global (outside) 1 interfacenat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0....