DHCP relay on Nexus 7004 "ERROR: Hardware programming failed"

[jbulloch]

`Hello All,

I've recently been introduced to a setup with a Nexus 7004 chassis running as interconnect to the orgs's servers. The Nexus device then connects back to the core. There are multiple SVI's setup on a primary VDC. These have historically been all static assigned, but now there is need for DHCP on few.  I've tried to enable as i would expect it to work..

feature dhcp

ip dhcp relay

int <svi>

ip dhcp relay address x.x.x.x

But i receive the following in reponse: ERROR: Hardware programming failed. Reason: DHCP HW programing failed.

I've turned up a bug report about this issue occuring if you have too many helpers set, but at this point i have none. Has anyone encountered this before?

[Ruben Cocheno]

@jbulloch 

check this https://www.cisco.com/c/en/us/support/docs/routers/7000-series-routers/116151-problemsolution-product-00.html

[MHM Cisco World]

this old post I solved before check my suggestion 

https://community.cisco.com/t5/nexus-devices/n7k-dhcp-relay-hardware-programming-error/td-p/4570504

MHM