Other Service Provider Subjects

What is maximum capacity of SCE8000 URL blacklist database? Release Notes for Cisco Service Control Operating System, Release 3.6.x says: "URL filtering feature on SCE8000 supports up to 500,000 URL entries." https://www.cisco.com/c/en/us/td/docs/c...

I'm getting this error when trying to map a subnet using the IP_RANGE mapping type. IP Range 241.5.5.0/24 violates single IP assumption How does one remove/disable this assumption.? This is using an SCE1000 (our test box) so is it possible it's a ...

Topology: The Cisco ASR with ISG is sitting between the ISP's routeed IP subcribers (on the LAN side) and Internet edge router.  ip subscriber routed  initiator unclassified ip-address   Current state: When an IP subscriber sends an outbound packet, ...

                   ccie service provider being ccie-sp how could i get good job, whether routing switching is best or service provider I know that both are best but which one is best among both

Hi,currently I have on my ASR9006 the card A9K-mod-80 and I want to buy a card A9K - MPA - 4x10GE with modules DWDM-XFP-58.17 =, my question is IT necessery to buy a lic for for DWDM XFP and the card MPA.thanks

Hi:We are a small telephone company that provide phone and internet services to 5 rural community in Patagonia Argentina. Today we have a mixed copper-pair+WIFI service but we need to move to better service and we need to:a) Reduce the copper to mini...

Hi,   We are ISP Transit and receiving complaints from our customers regarding High Latency issues. they send us the two attached traceroute test During the Latency issue and after the issue, When comparing the tests, we notice that there is delay be...

Hi I'm investigating if the Cisco Prime support to work SSHv2 for discovery nodes, Or if only support Telnet, Can someone clarify this point.   Thanks in advanced

Hi. I want to create such policy, that users, while in dead radius fallback mode are not getting interrupted, untill radius replied. All examples i saw, set 1 minute timeout, set fallback service applied and after timer expires, they force to drop se...

Hi Recently we configured an Hierarchical QoS for our PPPoE clients. After we send 2k users to 1002x, we got the following message on the router:   Dec 2 16:43:45.493: %CPPOSLIB-3-ERROR_NOTIFY: SIP0: cpp_cp: cpp_cp encountered an error -Traceback= ...

I have recently acquired two 3750 switches which I thought would be great to have as layer 3 switch for my home practice lab, but from what I found out today is that they only have a base ios image and not enough ram/flash to upgrade the ios. The 2 s...

Hello all, I have a question regarding how unused bandwidth is distributed in each class-map when bandwidth remaining ratio is configured. Let's take the following example below. policy-map PARENT_POLICY    class class-default        shape average ...

Hi is there a way to put a description on bonded port exemple: C5/1/1/UB 155 155 155 0 0 5 0 0 0 0 ( How can I put description here) C5/1/1/U0 10 0 0 1 1 0 0 0 0 0 PRIN_LAURI 25.2/579-597,615-633/8DS/64q C5/1/2/UB 200 20 20 0 0 20 0 0 0 0 ( How c...

HelloI have a direct peer which has the following state:Idle (PfxCt).To clear this, I did: clear ip bgp neighThe thing is, it went to Idle and is now stuck in Active. I even increased the max-prefixes but it is still Active.I can ping the neighbor.An...