Bonjouractually we have two isp uplink an (20mbs) FTTx and (20mbs) ADSL in the same router the first one is dedicated to VPN IPSEQ and the second for internet, ADSL bandwith is full, and there is plenty inbound BW on FTTXi want to dedicate 15mbs ...
Hello Chris,I don't know much about this solution and will appreciate if you as per now July 2015.Could you please clarify if Cisco Hosted Collaboration Solution, or any other Cisco solution, can be used as multitenant product or each customer requir...
Hi,kindly advise best suitable replacement for "s72033-ipservicesk9_wan-mz.122-33.SXI5" (as 12.2 series are EoS) with the same features.also, advise the new IOS road-map if available. regards,MA
Team,I would need your urgent help here. There is an odd behavior observed on the ASR1000 where the IP routing is automatically disabled every 2 hours and the routing config wiped out. It occurs on three ASR1000, two having an ESP of 2.5Gbps and the ...
Hello, i need configure Cisco as PPPoE-Server using local username.i get Authentication Failure on server side: PPP Server Conf:hostname ISP!aaa new-model!!aaa authentication login default localaaa authentication login PPP localaaa authentication ppp...
What do duct tape wallets, NFV, and Cisco Policy Suite have in common? Find out about the answer in the latest Cisco Policy Suite blog about the newest version which has just become downloadable. Check it out here
For a WiFi offloading project, I've considered ASR 1006 as iWAG with following hardware configuration:ASR 1006RP2+16GB RAMESP100ASR1000-SIP10In order to dimension the network, I want to understand how many concurrent users could be taken care by each...
Dear allI am trying to search about how to design and implement a NOC. Could you help me about this topic. I wanna know these items generally:1- How to design a NOC?2- How to find out requirements?3- what kind of mechanism should I use to answer prob...
Hello I really hope someone can help me.I work with CMTSs by Arris and Casa and Cisco 7200 uBR.Recently I have been tasked with deploying a uBR10012. I have a problem with upstream performace.When approx 40 CMs register on an upstream there is no ups...
Hello,I have question. Issue is LC A900-IMA2Z selt-reboot 82 times. Before LC A900-IMA2Z selt-reboot the router show logging TX/RX power high alarm of interface TE0/0/0 and TE0/0/1. After I fixed TX/RX power high alarm not found LC A900-IMA2Z selt-re...
It seems on many platforms that run IOS-XE (ASR903 for instance), that the "Show Interfaces Status" command has not been implemented. This is implemented on pretty much every vanilla IOS platform I've used.It's a very handy command to see the port st...
Hi Dear,I would like the Cisco GGSN command to configure the following: 1- Build up connection towards new (DCCA/OCS) server/s.2- Create rating groups for redirection. Please adviseKarim
Dear All. I have a very important question on configuration IP6 Prefix Delegation on our infra as below picture. First of all, i wanna tell you that the prefix assigned to Home router should be advertised to ISP core side. It is my objective.But i co...
