Hello,Can you help to recommend a Cisco router model that can support 50-60 PfR connections that we will put in the hub site?I think it is local to the branch router and irrespective of the PE (HUB) device, is that correct?Thanks,Deepak
Hi Guys,I am a returning member of this valubale community,, ned hlp on the followingi have SCA-BB 3.5.5 with SCE 2020, i want to have a admin guide for all protocols list supported on the platform. which can also explain how t add/update new protoco...
I am a Carrier Ethernet Certified Professional - MEF CECP - I was curious about the interest within the Cisco Service Provider Community for this Professional Certification. Cisco is a certified Equipment Provider and >70 Service Providers Worldwide ...
We working to provide dynamic badwidth control by using RADIUS COA to 3845 router.When we issue the COA 3845 rejects the message with invalid session id message.We are using following instructions to craft RADIUS COA message.http://www.cisco.com/en...
I configure some basic control-plane for 7600 router.the router is using LACP for ehterchannel.How to add the LACP for the control-plane ?=========================================ip access-list extended cp-critical-in permit ospf any host 224.0.0.5pe...
Dear all,I would appreciate your help in my current issue. We are running UC - System version: 6.1.3.1000-16 and the point is following.I need to set up an emergency phone, which means that if anybody picks up the handset, the telephone directly call...
To whom it may concern:Our main problem is a connectivity issue, that follows them following pattern:We have a DSLAM connected via an ATM cloud to our BRAS named iadsl-tlx-staana-2, the assigned IP address to the DSLAM is 201.122.81.209; this one has...
Hello,My customer has requested to activate the QM functionality on his existing service control architecture (one SM and one SCE 8000 Ver 3.7.1).By following the activation instructions the QM service got up and running.I've created a new package fo...
Hello,I would like to ask if someone has implemented the OS fingerprint feature on the SCE8000. Does it manage to identify the OS of the subscriber with success?(if the device is iOS, Android or something else?)May also someone share where i can find...
Banner support on the DCMIs it possible to run the banner from the DCM using the script, without Rosa NMSThe thing is that I would like to run the banner every 1 hour for 20 sec using the script ThanksIsrael
Hi,As per the configuration guide, maximum buffer size configurable per class is 491520 bytes. If i have a class with bandwidth percent 90, which will reserve 900Mbps out of 1Gig port, the latency offered by this buffer will be 4.3ms. It seems that t...
I am farily certain this front panel LED display message indicates bad or no RF. I have been through many Cisco documents off of the sitre and have not found one to verfiy and confirm for our Tech Ops group. Does such a document exist and can a copy ...
Hi all,Our customer is a mobile operator. They need a integrated solution for caching, QoS and Loadbalancing in a combination. From my understanding of their goals, they need to providing stable and speedy broadband access as well as good user experi...
