Routing

Hi all, my ASA 5506-x (Firepower) has 4 active interfaces Gig1/1 = outside  Gig1/6 = Outside_1 Gig1/2 = Inside = 192.168.81.7 (Vlan81) Gig1/4 = Winside = 192.168.83.7 (Vlan83) How should i do routing to get this result : Linux Server (192.168.83.11) ...

Hi All,   Can some one please tell me How STP will calculate Cost over Portchannels ?   Lets say we have two Gigs Channeled together - Does it take this as 4 or 8 ?   And Why CDP will not detect Portchannels ? It will show as two entries in Neighbor ...

Hi All,   I have some questions against VTP.    1> Does VTP breaks DTP if it fails to match VTP Domain name ? 2> Does Transparent Switch need to match VTP Domain name to pass VTP Updates ? 3> How we can make changes in VTP V 3 revision numbers ?   Th...

Hi All, I have configured switch as a dhcp server. I want it to release the ip if client is not passing traffic for some time. Does switch can provide that level of control ?

Hi, I have a problem with router 2811 , hight utilization CPU but I don't determinated the process . See the attached file (now is not very hight but before I had more then 65 % ). In this case when don't see the process who cause the utilization CPU...

Hi All,   What will be the consequences if we create Ether Channel/Port channel on One side and leave other side Default ?   What happens if we use PAGP/LACP and Static "ON" ?   Thanks, Prasanna Kumar Desireddy

I have this configuration on 7600 router: line vty 0 4 transport input lat pad mop telnet rlogin udptn nasi ssh acercon!endam trying to find out what is the acercon means.can anyone please help me with that.

Hello all access-list inside_in extended deny icmp host A host B log access-list inside_in extended deny ip host A host B log     I would know the behaviour about the ACLs. As I understand the ping from A to B is not allowed, but the A receive a unre...

Hardware - Cisco 2901 Router   I've got two HWIC-1FE modules installed in the router, along with a VIC2-4FXO voice card.  Both HWIC-1FE modules show up in the 'Show inventory', but only one shows up when I do 'Sh IP Int Brief'   Any thoughts on why I...

I have two ASR1001-X routers running 3.16.02.S, each with 8GB DRAM.  We have three WAN links, and are using BGP to load balance with our providers.  Currently only 1 router is up and running, just got the other one. What is the recommended method of ...

 Hey -I would like to create as IP SLA for our remote Internet circuits that will trigger an alert when not working. This way we will be alerted even if the Outside interface remains up and pingable. The architecture is such that if the Internet is d...

I was watchhing the cisco live presentation BRKSEC-3054 - IOS FlexVPN Remote Access, IoT and Site-to-Site advanced Crypto VPN Designs (2017 Berlin) and it mentioned in a slide iWan3.x LISP/ESON. I cannot find any info on this and was curious if anyo...