Switching

Hi All, after enabling the SNMPV3 on cisco Router SNMP which is already enabled on the router stops responding to Poll. Need a suggestions Configs from Router (community string is hided) sh star | in snmpsnmp-server engineID local 80000009040A12F672s...

Hello,if I am browsing on my PC and its very slow , we can also say that my internet is working very slow and also facing network breakage problem.so that this type problem occurs from looping in our network, if yes then how can we check looping in n...

HiI have netflow configured on my router to send data to my internal server at 192.168.0.50 on UDP port 2055I do have an asa in between and so I allowed icmp from the outside on the asa and I am able to ping the server using the source ip of 1.1.1.1....

We are in the beginning phase of migrating to the Cisco VSS architecture.  I am interested in finding out two small but important answers.The two current Cisco Catalyst 6513 switches use WS-X6548-GE-TX modules.  From reading various post on this foru...

Hi,Based on the following logs what does it mean? *Aug 26 04:47:27.874: %SSH-4-SSH2_UNEXPECTED_MSG: Unexpected message type has arrived. Terminating the connection from 85.105.19.171*Aug 26 06:11:50.077: %SSH-4-SSH2_UNEXPECTED_MSG: Unexpected message...

Okay, so I just configured this box and I have snmp/mrtg looking like Gi2/2 might be failing/flapping? I wanted to get another opinion of whether this is an mrtg/snmp issue, or my port is having problems. Have any of you seen something like this befo...

how to reset a switch

Good day All I have a new 93128 that I want to test my RADIUS, But I only want to connect one port to my network, I want to keep that port from broadcasting anything because I have a config on it. But I want to see if I have the correct RADIUS config...

Packet Tracer 6.2.0 is constantly crashing on all of my computers when I use it. How do I capture the dump file so I can add it to the bug report?Thank You.

Hi there,I've a strange problem that I hope someone can help me with. I had configured a trunk port between Cisco 3560 and Ericsson switch on the 3650 the port is configured as  switchport trunk encapsulation dot1q switchport mode trunksame on the Er...

HI guys . I have routerA with several subnets/vlans connected-via-EIGRP-to Distribution routerB -firewall-internet.  Distribution router B has whole bunch of routers connected to it (kind of hub and spoke network).On router A I have vlanX which I wan...

Hi All, Can anyone please confirm the minimum BFD min_rx timer value supported by Cisco 7609 Routers [ IOS Version 12.2(33)SRE ]? Thanks!

Hi All Are there any free good tools for auditing a network, gathering info, and producing a topology diagram? What do people mainly use ? 

Hi All Are there any free good tools for auditing a network, gathering info, and producing a topology diagram? What do people mainly use ?