Hi allwe have implemented some trunks from out CUCM to a CUBE then to webex.we can call the extension from the cucm on webex and it works fine.we translate the source of the call and prefix it with 8801, so webex sees the 8801 plus the extension as t...
Hi guys we had an issue routing to webex calling to our on prem cucm via the trunk.we could not dial webex users from our cucm via the trunk, but we could dial the same numbers from webex to cucm.i added a route to the source number from webex to poi...
Hi GuysWe have 3 CMS servers running on the M4 platform which have now gone end of HW support.We have a mix of VC's on prem, Room kits, Room kits, DX80, SX20, SX80, C20What are our options here? move to new hardware, move the devices to Webex?Cheers
Hi guys, I am looking for some ideas how to troubleshoot an issuewe have a pc, a powerful apple pc used to design etc, this pc has a 10G copper connection to a 9200L, this then has a 10G fiber back to a comms room, the server is located here, also on...
Hi GuysIs there a reason we see Microbursts on switches when the average load is say 20-30% of the 10G link? if the port can sustain line rate with no queuing then why do we see Microbursts?I see we can alleviate some of this with the command belowqo...
HiI have done some more debugs today, it appears if we forward calls to mobile / landline it fails, I have a feeling the ITSP (BT) in our case are rejecting the calls on their SBCs that link our Webex to the PSTNI am seeing the below on the debugs on...
Hi Roger,Apologies if i incorrectly laid out the issue,in a clearer way, say my source number in cucm is 24091991 and I’m dialling 6400 which resides in WebEx, the question is, do I need to add a route on the WebEx side to be able to receive a call f...