does Catalyst 9300/9400 support ip wccp 61 redirect in

[terry_lin1]

Hi all

does Catalyst 9300/9400 support ip wccp 61 redirect in? from the CLI handbook it's only show ip wccp web-cache redirect in, not sure about using service group. please someone help me. Thank you

[DAVID YARASHUS · Accepted solution]

When the documentation shows "{ web-cache | service number }" that means you can enter either "web-cache" or any of the service numbers (which are in the range of <0-254>, as you can see in the snip from the interactive help below).

LAB-C9300-48U-E(config)#ip wccp ?
  <0-254>            Dynamically defined service identifier number
  check              Enable a WCCP check
  source-interface   Set source interface for Router ID
  web-cache          Standard web caching service

That's from a 9300 series switch running IOS XE 16.5.1a.

[terry_lin1]

Hi 

Thanks for your time and help. Thanks