11-18-2008 11:34 PM - edited 03-06-2019 02:33 AM
Hi,
I config a 4+1 port etherchannel as:
port-channel load-balance dst-ip
interface Port-channel1
lacp max-bundle 4
What will happen if one of the active interface (for example the 3rd interface) in port-channel1 fail? Will the algorithm re-calculate the hashing? Or just switch the traffic from 3rd port to the backup port?
Solved! Go to Solution.
11-19-2008 12:16 AM
Hello Alex,
the most efficient move is the second: the backup link takes the place of the failed link.
It should be possible because LACP messages are exchanged also on hot standby / backup links so the two devices can make a change on the fly with the backup link.
Hope to help
Giuseppe
11-19-2008 12:16 AM
Hello Alex,
the most efficient move is the second: the backup link takes the place of the failed link.
It should be possible because LACP messages are exchanged also on hot standby / backup links so the two devices can make a change on the fly with the backup link.
Hope to help
Giuseppe
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide