02-22-2019 09:52 AM
My boss is asking me to test this new model switch. Do you have any test plan for it or have any overview of it? Thanks in advance!
02-22-2019 09:57 AM - edited 02-23-2019 09:07 AM
universal Test Plan based on organisation requirement and features. make sure the model is correct.
this more dependent on business.
Exmaple :
PSU Fail test
OSPF test
DHCP spoof Test
DoS attack test
SNMP Test
IGMP Test
SSH attack test
So on list continues.
02-23-2019 04:53 AM
04-29-2019 11:30 AM
Have a look at the product page:
https://www.cisco.com/c/en/us/products/switches/catalyst-9600-series-switches/index.html
There you will find at number of documents that can get you started.
There is also a couple of DevNet pages that can get you started on Cisco IOS XE, the operation system for all Catalyst 9000 switches, SD-Access, and Cisco DNA Center
https://developer.cisco.com/site/ios-xe/
06-23-2019 06:37 PM
Wondering if 9606 Switch, as a Hub, supports Phase 3 DMVPN ? If so, how many Spokes can a 9606 hold/support up to ? Our Spokes are ISR4000 series routers.
06-24-2019 12:16 AM
Since this is new product in the market, many features yet to test in the real world setup. suggest to contact local SE or Cisco Partner to help you
as per the document
The switches also support advanced routing and infrastructure services (such as Multiprotocol Label Switching [MPLS] Layer 2 and Layer 3 VPNs
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide