01-04-2015 11:16 PM - edited 03-18-2019 03:51 AM
Can SX80 connect two Cisco TelePresence Precision 60 cameras?
and how to?
I can't find the information from documents.
Solved! Go to Solution.
01-05-2015 02:01 AM
Jet,
yes, certainly 2 Precision 60 camera's can be connected.
When you want to control the camera's then please connect any dumb switch to Ethernet port number 2 or 3 on SX80 and connect the other camera's to the switch. There are 4 input ports and hence 4 camera's can be connected to the SX80.
Please rate replies and mark question(s) as "answered" if applicable
01-05-2015 02:01 AM
Jet,
yes, certainly 2 Precision 60 camera's can be connected.
When you want to control the camera's then please connect any dumb switch to Ethernet port number 2 or 3 on SX80 and connect the other camera's to the switch. There are 4 input ports and hence 4 camera's can be connected to the SX80.
Please rate replies and mark question(s) as "answered" if applicable
01-05-2015 02:06 AM
Thank you very much!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide