Hello all,We are required to provide information to management for: - Call Attempts at Busiest Hour - Average voice traffic at Busiest Hour (Erlang) - Average Call Duration (per second) - Total call duration (per day or hour) - To...
Hello Everybody . . .I´m working with a Router 3845 (dsp farm), Switch 6509 (voice E1), CUCM 7.0 and Unity 7.0. The requirement is to have an Auto Attendat for incoming calls.Is possible to create an Auto Attendant in Cisco Unity 7.0..?? Anybody has...
Hi All, I have a couple of Call Mangers Running version 4.1 and a Unity server all running windows 2000 OS. I see alot of windows updates availble for all servers however, I'm aprehensive to installing all the updates. What's the reccomendation to in...
Dear All,I have a Cisco Unity server (MCS-7825) running Cisco unity version 7.0 and this version is upgraded from 4.0(5) ,All thing working fine except searching by subscriber it takes a long time to give the subscriber information (about 20 to 30 s...
Guys:I just wanted to confirm that the latest version of the full Version of Cisco Unity is 7.0 with Microsoft Exchange 2003. Is this correct? No Linux at this point? Thanks, Tom
Currently installed: Unity 4.0(4) on a member 2003 serverExchange 2003 on a second member 2003 serverBackup Exec on a third member 2003 serverDesire to move Unity onto a different member server, probably Server 2008 x64. Would the following procedure...
CUPS 7.0 adds the capability to support multiple LDAP search bases. To specify more than a single LDAP search context use # as a delimiter in the LDAP Search Context field on Cisco Unified Presence Administration.An example of the supported format ...
Hi ;The CME and CUE been setup work fine. But for Voice MAil have some issue here.There are 2 method to listen voice mail ;1. Press "message" button then follow the instruction to listen voice mail. This method work fine no issue.2. Use "Service" but...
Unity CX version 7.1.3.10000-68 . I installed the ODBC and wallet card wizard files, started the proxy service and set days to 3 to keep service started, I configured a user with system admin and remote admin rights. When I try to loginto the pub to ...
Unity 4.0(5) with FO voicemail only with Exchange offbox. what is the best way to move all these users over and their messages to new unity servers and exchange server? im looking at the global subscriber manager tool. im assuming callhandlers dont g...
if you have 2 unity servers each with FO (total of 4 servers), all part of same domain. Can you only have one of the unity servers as the domain controllers? or both?
CUCM Translation pattern allows to prepend digits to the dialed number. To add a suffix , the only option is to use translation rule on the gateway.The following translation rule appends a 0 to the end of the dialed number. voice translation-rule ...
Partitioning is based on number of "logical" disks.With Raid Type 1(1+0) two logical drives are created on each pair of hard drives. CUCM 6.0 Disk Partition Size 1 disk - Active and Inactive partitions get 18.25%, boot/swap get a chunk (2.2MB) an...
A pause cannot be inserted using the Translation pattern in CUCM.The alternative is to do the manipulation on the gateway. With MGCP there is no way you can insert a pause. However, with H.323, you can use the comma character in the prefix in Dia...
The CUCM by default provides different ring cadence on the IP phone for on net and off net calls but its not possible to configure different ring tones. The ring cadence doubles in frequency for off net calls. The 'Chirp 1' chirps twice when the ...
