Unity Connection V 7.0.2. I want to stop the Cisco DRF Master and Local services. Looks like I can't, is this true? I have a hung backup job that has been cancelling for several hours. I saw in another post that stopping the TOMCAT service will st...
I am running 11.5 and recently without any changes in our environment the Subscriber is spitting out the following error every 2 min:Primary node NTP server, cuc-pub, is currently inaccessible or down. Verify the network between the primary and secon...
Hello Community,what is the main porpose of the Route Class under Route Patter? What exactly is the function of this field? Do you have some examples of when to use which value?
Is it possible, from "Cisco Webex Meetings" application, to connect to a "Cisco Jabber" meeting (PMR - Participant code) ? If so, what is the format of the link to enter into the cell "connect meeting" ?
Hi all, We have batch of users need to update sAMAccountName in AD. i have performed full LDAP sync in CUCM and Unity after the change was finished in AD, it is all good in CUCM, but only 50% users in Unity whose alias are updated. The Alias for the ...
Hi All i like to create CUCM home lab kindly help me on this what configuration of Server i need for this and which CUCM is best for this . i know this is very basic question i google but get confisued they is alote of material available on it. . ki...
Using a Cisco IP Phone model 7962 - all users attempting to dial in to a Google Meet session upon entering the PIN for the meeting are prompted to enter the PIN and press enter. This repeats with no access. If a cell phone is used the PIN is accepted...
Looking at the 12.1 docs for PC Assurance, I see no mention of support for the new TelePresence devices. Do we know if these are supported yet? https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/setting_up_devices/PCA_12-1/Setting_up_...
So after a fresh install of Cisco Unified Communications Manager System version: 11.0.1.10000-10 I've had the problem that most of the phones that I would register with CUCM the services tab would open up constantly with a blank tab and say "Select s...
I am in the process of upgrading the hardware for my CUC cluster and am trying to decide which path is best. My current hardware is Cisco approved but it is out of resources and warranty so in order to gain the benefits of 12.5 I have purchased new C...
Does anybody know what's the difference between clock source network, internal vs line? Thanks.
In CUCM 8.5 is there a way to determine which phones are using Public Space Licensing in a deployment? I need to get them converted to UCL but need to know model is using which license type.
hello all,I'm trying to set some things as follow: network A has a VOIP pbx, network B has cucm, and network C has a cucm also. Net A see Net B but not Net C, Net B see Net C. I have setup a sip trunk from voip pbx to net B cucm and its working fine,...
I have configured a CTI route to CUC in order to have an auto attendant for my lab, since i hace 10 extension but just one DID to recieve call from PSTN . Greeting is working but when i dial the extension CUC send a refer to CUCM containing the exten...
Hello,I have CUCM (11.5) configured to my own LDAP server.I created LDAP server to pull data from mongoDB instead of AD (for specific reasons).when trying to sync i receive the following error in the logs (which i cannot attach due to CUCM living in ...
