Hi everyone,
I am struggling with configuring an E1 line for use with cucm on an an mgcp gateway. I have a BE6000s which I have basically re-used most of the pre-configurations that were there. I have a I port E1 card and an FXO card for my pstn acce...
Hi All,
I would like to ask on how to reinstall or rebuild the CUC and IM&P subscriber? Our secondary server went down and we did not recover the subscriber application/vsphere or esxi. So we just reinstall again the esxi on the secondary ucs serve...
Hi Team,
Hi Have Cisco Prime Collaboration Assurance version 10.6 and need to integrate with LDAP using SSL.
Normal connection without SSL (port 389) the test connection is successful.
But using SSL, could not find how to import the certificate to t...
Hi,
I cannot take the utils snmp walk 2c on objects 1.3.6.1.4.1.9.9.156 on all CallManager Subscriber Nodes. Sometimes, it provides a few objects (not the completed objects); Sometimes, it showed the below error.
Any idea?
Hi All-
Just curious if you can upgrade to 8.0.2 if it says minimum memory requirement is 2.25GB and we have a MCS with 2.0GB.
Will that work?
This is a really old MCS 7825H platform and not sure if memory upgrade can be done so we will try to see...
Hi All,
And thank you in advance.... We have a legacy H.323 Tandberg device (not connected through a GK or anything) which we would like to join to our WebEx meetings. We're aware that's possible but WebEx meetings we think seem to have a range of...
Hi All,
And thank you in advance.... We have a legacy H.323 Tandberg device (not connected through a GK or anything) which we would like to join to our WebEx meetings. We're aware that's possible but WebEx meetings we think seem to have a range of...
Hi
What happens to the phones if the callmanager.pem and tvs.pem expires?
Shouldn't the phones stop working as the trust chain is broken?
I have read a few nice howtos on how to fix this but none of them says what happens if they expire.
https://s...
Hi all,
I've configured collaboration environment with the following components - CUCM, IM&P, Expressway Core and Expressway Edge. When I try to login via Jabber directly to IMP (inside corporate network), Jabber client logs in successfully. However,...
I had to power off during a VM installation of CUCM 8.6.2 (forgot to disable the NIC to avoid having duplicate IP). Now, at power up, it gives me this error:
Installation failed. Restart Install to recover from failure.
I tried resetting the VM, ...
In order to upload ISOs to my VMWare host I usually traverse a 100Mb switch and an ASA5505. This is painfully slow so I figured that temporarily putting my laptop in the same VLAN/subnet as my VMWare hosts would speed things up since my core switch ...
Hi,
I am currently building a UC lab and I have noticed when I use the Jabber Client for Ipad when I add someone from another organisation I see presence and am able to IM that person however I see no call option which leaves me having to manually di...
Hi,
I'm trying to configure a SIP trunk (from sipgate) to my Lab CUCM in a virtualised environment. Has anyone got any tips? I'm assuming I'd need to terminate the SIP trunk on a router which I'd hope to virtualise on GNS/UNetLabs.
Any help is appr...
