All, Is there a method for converting an existing single card flex flash to RAID 1 without losing data on the existing flexflash card. Blades were originally purchased and configured with a single FlexFlash SD card. Now there is a desire to add ...
All, Is there a method for converting an existing single card flex flash to RAID 1 without losing data on the existing flexflash card. Blades were originally purchased and configured with a single FlexFlash SD card. Now there is a desire to add ...
Hello,we are using the following setup:- B200 M5 Blade Server- Firmware Server: 3.2(3a)- Firmware UCSM: 3.2(3a)The Boot Order looks like this: After assigning the service profile with those settings and booting the server, the UCSM shows a different ...
Hello, My question is about a a NIM E-Series NCE which doesn't boot a VMWare hypervisor. First of all, a few things which look abnormal to me.On the NIM E-Series NCE, I get this: EN140N-FOC22022YY0# scope chassis EN140N-FOC22022YY0 /chassis # sho...
Hello,My question is about connecting a NIM E-Series NCE to a PC via a console cable and the management port. NIM E-SERIES NCE Management port (port 2) (see image 1 below) | | Console cable (see image 2 below) | | PC The settings for the connection...
Hi All, Good Day, Have anyone had any experiences with the newly released patch 3.0(4d) for UCS firmware's yet? I have been trying to perform some research on its stability to be run on production environment.
All,We have a Flexpod system with a UCS 5108 chassis, B200-M5 blades, 6248 FI, Nexus 9K, and NetApp storage. It is connected and configured using the CVD document; however, when exporting VMs from ESX, the file transfer is horribly slow and times out...
I was wondering what others have been doing over the years when implementing multiple FI domains into a storage fabric (MDS) and the vSAN management. You really have 2 options:Option 1 --> Each FI Domain has a distinct vSAN and the MDS to storage arr...
Hi is it possible to delete som lines from the audit or event logs in UCS central ? i have a customer that need to know if it possible. /Kristofer
Hello, we recently did an update of our UCS Manager an the Fabric Interconnects. The firmware was raised from 3.2(2c) to 3.2(3a). Before the update we could choose on our B200 M3, M4 and M5 server whether to use KVM Console via HTML5 or Java. Now t...
We are trying confirm any settings on the UCS related to q-in-q packets. Single tagged dot1q are passing fine, but double tagged are not. Both the upstream router and the VMs are properly configured. We have UCS's with 6248's that are not having t...
I would like to know if it is possible to configure the memories where I have 3 sticks of 8GB and 9 of 4GB, if possible what sequence I should follow in the memory slots. Thanks.
Hello, I am looking to take a certification which mainly puts my in the data center setting up blades and cabling. I am looking for training for the hardware and certification. I found this video on youtube and it seems like something I would be i...
Here at LDAP provider details Bind DN: Base DN: port: 389 or 636enable ssh: Filter: $AMAccountName=$userid (here i m mentioned my CN name , which group i need to add , getting error here)attribute:password:confirm password: timeout : 30vendor : ms ...
Several UCS C220 M4 and C240 M5XS servers. VMware Cisco specific iso ESXi 6.0 U3 install. No updates applied. CAT 6 cabling Cisco Nexus 3172TQ (two switches - primary and secondary) Making use of both on-board10Gb adapters and on added PCIe adapters...
I am getting the following message on one of multiple B480s with 1340/1380 mezzanine cards. All blades have the same host firmware package. Downgrading/Upgrading did not help. Running version is 4.2(3a). I did not see this in the release notes. ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 05:23 PM | ||
04-23-2024 12:18 AM | ||
04-16-2024 02:26 AM | ||
04-04-2024 11:22 AM | ||
03-18-2024 06:52 AM |