Hi, I just purchased some new hard disks (total: 5 x 500GB HDs) and plugged to C220 M3S server, which is running the BIOS version as C220M3.2.0.1b.0 (Build Date: 05/26/2014). I cannot select the option as RAID 10 on the below photo. Any idea?
Hi, I just purchased some new hard disks (total: 5 x 500GB HDs) and plugged to C220 M3S server, which is running the BIOS version as C220M3.2.0.1b.0 (Build Date: 05/26/2014). I cannot select the option as RAID 10 on the below photo. Any idea?
I have power issue logs shown in my UC220 server and it gives in server overall status " Server Fault "when i check the logs i found the following :PVTT_P2: Processor 2 voltage is lower non-recoverablePVTT_DDR_GH: Memory channel (GH) voltage is l...
Hi All, Its new installation of Cisco UCS with Brocade SAN switch 6510. I have followed the Cisco UCS to Brocade Connectivity Guide. Even though the on both Switch and FI side the Link is not coming up. No lights are glowing. When I checked the s...
If I order a VIC 1225 on a C-Series server are qty 2 of SFP-10G-SR SFPs included?
I have one C series server in a lab and I want to manage it with UCS manager but I have no other UCS hardware. Can I install UCS manager in a virtual appliance and use it to actually manage the physical server (not just emulate UCSM) or do I have to...
HI all, I am facing an issue after recommission my chassis in to FI that access accessibility problem and i am not able to see any servers
HI all, I am facing an issue after recommission my chassis in to FI that access accessibility problem and i am not able to see any servers
I want to upgrade the Cisco UCS 5108 (PID and SKU N20-C6508) with the following blades B200 M1 (PID:N20-B6620-1) to the latest and greatest UCS Manager to 3.1(1h). I really need the HTML5 capability because the latest Java we installed considers the...
If the UCS Serie C server has the power cords unplugged, are we still able to access it thru the CIMC tool using as well POE (Power over Ethernet)?
I need to find the the list of IQN resources assigned to each service profile. I can see details of IQN pool, used and available IQN resources, the service profile which been used particular IQN pool from UCS central. but cannot find the list of IQNs...
We have recently purchased a VMAX 450F(All Flash Array) and would like to be directly connected to 9248 Interconnect Switches so we won't need our MDS 9148 switches anymore. All of the servers that we will have on the SAN will UCS managed servers. ...
I am new to Unified Fabric, and trying to understand this. There are customers who connect Fabric Interconnects directly to MDS switch without any Nexus 5K in between. If Fabric Interconnects are capable of providing connectivity to LAN and SAN isl...
I have a C3260 with two server nodes. Each server node has two 40Gb uplinks ports. I have created 5 vNics for each server node. My northbound switch is two 10Gb fex attached to two Nexus 5548 switchs using enhanced VPC. Since the 5548 are 10Gb switch...
I seem to recall that in March, April or May of 2015 there was a Support Community Troubleshooting UCS 6324 presentation. I believe this prezo was recorded as well. Does anyone have any information about this ?
Hello Anyone know which version of java is recommended for UCSM 2.2.6f? Thank You
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-20-2024 02:37 PM | ||
05-16-2024 11:32 AM | ||
05-16-2024 07:46 AM | ||
05-16-2024 02:21 AM | ||
05-07-2024 03:15 AM |