Hi Team,
We have configured CIMC for one of our C220 M3 server while trying to install ESXi ios file we are not getting the boot option after pressing F6. CIMC version 2.0(8d).
Please help.
Thanks,
Mahipal
Dear All,
I have configured the UCS chassis with 5 blades and installed the esxi on all the five blades..
I have created a 10 VNICS per server and as of now i have ip for esxi management by combining the two vNICS and the FI's are connected to the...
Hi Everyone
My team is currently deploying a Cisco UCS for a client here in Nigeria, we have two chassis, two FI, two MDS san switches, one switch for management and one switch (Nexus 9372px) for Uplink.
We have a challenge currently, after we associ...
Want to configure CIMC of C220 M3 server using console/serial port. I am trying it first time, hence seeking for help.Server is connected to TSM router i.e 2901 via rollover cable. Done below setting on console server i.e. 2901 but no avail.
Do i ne...
Hi,
In our infrastructure we currently have a pair of 6120's in HA running firmware version 2.2(6f) with 16x B200 M2's, we are looking to purchase some C220 or C240 M4's, am I correct in thinking that if we purchase the C220/C240's we can connect th...
I am having trouble running UCS simulator on Windows 10. It was working fine, I guess some Window and/or Java update has caused the trouble. It downloads ucsm.jnlp, after some moments, I get a message after verifying application -- Unlable to launch ...
For UCS we have one Fabric interconnect version 2.1, customer purchased one more FI to add for cluster configuration.
The FI comes with latest firmware, please let me know can we downgrade the new FI and form a cluster or upgrade the existing FI to l...
Hello,
I am looking for installation guide of following HBA card for UCS Server, unfortunately i couldn't find.
N2XX-AEFCI05 Emulex LPe 12002 Dual Port 8 Gb Fibre Channel Part.
Can any body share the installation process ?
Is it hot swapable card ?
R...
When FI-A and FI-B is active, we are able to access the FI cluster GUI. When FI-A, failed we are not able to access the FI-cluster GUI.
It is normal or do we missing any configuration for failover.
Hi, all,
i have configured Service Profile Template, but i can not assign it on blade server because of following error
There are not enough resources overallMAC address assignment failed for a vNIC, possibly illegal MAC address or no available MACs ...
Here's an odd one for you!
I deployed UCS Central Appliance, v 1.3(1c), and performed various bits of configuration last week. I've gone to log in today and am unable to login to the standard interface, https://ucsc-01/#. I get a spinning cog that ev...
