Hello, probably a very obvious question but will changing the vNIC Adapter Policy from "not set" to Windows require a reboot of the server OS? Or can this been done without a reboot? Many thanks Roy.
I have a customer who have (2) Cisco Nexus 5500UP connected to a pair of Fabric Interconnects. Each 5500 connectes to both FIs with VPC. They also have Fabric Interconnects cross connected which I don't see in any Cisco best practices docs. Is the...
I have a help desk and some executives that need their extension blocked/masked. They want to be able to call people but they don't want their number to be visable so the caller can call them back.
Cisco NEXUS with Fabric Extenders connected to UCS, what is the best design?
We recently implemented a new network backbone, the NEXUS 6004, with Fabric Extenders. Our UCS fabrics are connected to the FEX (not direct to the 6004) I have been unable t...
Hi Supportforum,
Running a UCS on FI 6248 and C220 M4S in dual datacenter setup managed by Central (UCSM 2.2(5b) and UCSC 1.3(1b)) and trying to incorporate the Solarwinds (Platform 2015.1.2, QoE 2.0, IPAM 4.3, NCM 7.4, NPM 11.5.2, NTA 4.1.1, Toolse...
I have decommissioned a server from the UCS manager and physically removed however the server is still listed in the Equipment Server list and is completely unmanagageble. I've attempted to remove with via the Server Maintenance but get the followin...
Hi All,
I inserted a 6x blade server B200M4 in chassis, but the power button of only one blade did not color Amber and no led in the front of blade was light, So no power supply to it
I tried many slots in chassis also tried to open it to show if the...
Dear Members,
I have searched a lot but i am unable to find the exact information about the port channel from IOM to FI. In discreet mode of UCS, the uplinks role of 1 2 4 and 8 is clear and also if one link fail and the chassis is re acknowlege, the...
Hi,
I am new with intallation of Windows Server to a standalone UCS server. I am planning to install Windows Server 2012 R2 in a standalone UCS C220 M3 server. Can i follow the same procedure as how Windows Server 2008 R2 installation to UCS server?
...
Got a standalone UCS 3160 with 60 4TB drives that is going to be used for mostly video storage. Has the Cisco 12GB SAS RAID card with 4GB Flash. Trying to create a RAID aray through the IMC with 40 of the drives. Will allow for 30 of the drives, b...
Hi,
What is the best way to migrate servers currently on HP chassis equpment to a brand new Cisco UCS chassis? Is there for instance a a HP tool to migrate over to a boot lun? Then we can boot the same servers up on Cisco UCS?
Or do we have to rein...
Discovery works fine it's showing up but when I try to right click and acknowledge. It says it's successful but then comes up with the message below. Any ideas?
More info. This chassis is only plugged into the Subordinate Fabric not the primary. Wou...
Hi,
I am looking for information on the best practice setup for iSCSI setup with UCS (particularly an EMC VNX back end system). Currently we have our A and B links into one Cisco 3850 stack, and A and B storage uplinks plugged into a separate 3850 s...
I've setup more than 35 UCS clusters at my previous job... However, at my new job we have only 1 core/upstream device for which I am supposed to configure a new standalone UCS w/6324's to. I've never expenced an environment with only 1 core 6509 with...
We have the clustered ucs domain and its showing the management interface is down.below checks i have done.
Able to ping the gateway from both Mgmt Interface A and B.
There is no packet loss between the Management interface and switch interface where...
