Unified Computing System Discussions

iSCSI boot error ViC 1240 initialize error 1

Hi,we have setup iSCSI booting on a new B200 M3 blade that has a ViC 1240. When the blade boots up & goes through the iSCSI boot, the "first" iSCSI boot option ROM is successful, but the second one shows the "initialize error 1" error. when i look at...

Resolved! Adding vNIC to existing Service Profile Template for UCS

Hi,I would like to add a vNIC to an existing updating service profile. It is not entirely clear to me if it will require an immediate reboot of the associated servers or if the reboot can happen at a later time? Any help is appreciated.FI model: 6120...

Windows 2012, UCSM 2.1.2a, PCI discovery, vnic/vhba placement

customer has a UCSM 2.1.2a, B200-M3, one VIC-1240, creates a SP template with vnic0,1,2,3 (fabric A,B,A,B); automatic vnic/vhba placement; then creates multiple SP's and installs W2012 (not R2) on the local disk and claims that he sees different PCI ...

UCS mini firmware downgrade

Is it possible to downgrade firmware packages from 3.0.2 back to 3.0.1? If not, are there alternatives for reconfiguring the chassis?

Resolved! Traffic Prioritization

I have a number of vnics create in UCS. The traffic on some of them is more important than traffic on other of them. Can I assign priority to traffic on a given vnic in UCS over that on a different vnic?

UCS B200M3 Best population DIMM RAM

Hi Everybody,How best populate memory DIMM on B200M3 if I have 2CPU and 12x8GB RAM (96GB tot)?A0, B0, C0, A1, B1, C1 E0, F0, G0, E1, F1, G1 (pag.42) or:A0, E0, B0, F0, C0, G0, D0, H0, A1, E1, B1, F1 (pag.41,43) ???[http://www.cisco.com/c/dam/en/us/p...

UCS Performance Manager - Temperatures

Currently evaluating UCSPM and had an incident with IOM Temperatures. Went to the UCSPM IOM Page and the only graphs or templates that are there are for Utilization and Traffic.Even on the chassis, or FI pages there is none.Seems a very basic item to...

C220 M4 - Troubleshooting syslog

Hi all, I'm trying to troubleshoot on the syslog for my Cisco UCS C220 M4 which we are not able to figure it out.Is there any way to SSH to the UCS DRAC IP or run some telnet command from the UCS GUI interface ? I try to putty in to the UCS DRAC IP b...

nexus 1000v 5.2(1)SV3(1.1) on vsphere 6.0

Hi About to upgrade a vcenter from 5.5 to 6.0 but I am running nexus 1000v 5.2(1)SV3(1.1) is that supported on vsphere6.0?

Resolved! Could you please help me to understand about IMC supervisor operation?

Hello, This is Jungwo Hong from E-tech system in Korea My customer want to know about the simple process between IMC Supervisor and CIMC on the server. Would it be possible to know how they communicate each other (like using some protocol )? and...

clear counters interface command on FabricInterConnect

after logging in nxos on FabricInterconnect ,I used "clear counters interface all" command in order to delete all of the packet-infomationsafter than I checked whether the infomations has deleted .I know All packet-infomations have deleted ,regardles...

Direct attached Cisco UCS 6324 Fabric Interconnect to Cisco MDS 9148

Hi everybodyI have one problem: I configured two ports in FCoE Upñink ports on Cisco UCS Fabric InterConnect 6324, the ports that i configured are direct attach on Cisco MDS 9148 Switch on fc1/5 and fc1/6 interfaces but UCS manager show me the error ...

Resolved! How do I dynamically filter input values?

Let me start out by saying I'm a sysadmin with some coding experience, but I would never call myself a developer.I have a single workflow for provisioning VMs in multiple physical datacenters.Each datacenter has it's own vCenter with multiple ESX Clu...

cmdlet to show FI module, Model, UCs, operversion

I am trying to get a list of my FI, Names, OperVErsion but I can only do it in 2 cmdletshow do I combine the 2?get-ucsfimodule | ft model, UCsget-ucsfirmwareinfra | ft ucs, operversionany idea?