Hi everybody
I have one problem: I configured two ports in FCoE Upñink ports on Cisco UCS Fabric InterConnect 6324, the ports that i configured are direct attach on Cisco MDS 9148 Switch on fc1/5 and fc1/6 interfaces but UCS manager show me the error messages that I capture on the upload file.
some aditional information
UCS Mini with UCS Manager 3.0(1c)
Fabric Interconnect 6324
- Boot loader version: v1.022.0
- Kernel version: 5.0(3)N2(3.01c)
- System Version: 5.0(3)N2(3.01c)
- Package Version: 3.0(1c)A
MDS 9148 SAN Switch
- BIOS: version 2.1.17
- loader: version N/A
- kickstart: version 6.2(9)
- system: version 6.2(9)
- BIOS compile time: 01/08/14
- kickstart image file is: bootflash:///m9100-s5ek9-kickstart-mz.6.2.9.bin
- kickstart compile time: 6/3/2014 1:00:00 [07/11/2014 17:47:38]
- system image file is: bootflash:///m9100-s5ek9-mz.6.2.9.bin
- system compile time: 6/3/2014 1:00:00 [07/11/2014 19:45:36]
- System version: 6.2(9)
Could yo help me?