Hello, I have a C9105AXW-B access point configured for office extend. When the AP is joined to an AireOS WLC (8.10.185.0) in office extend it doesn't broadcast a local personal SSID. When I join the AP to an IOS WLC (17.9.5) in office extend mode I...
Hello,I have a 9800-80 (HA Pair) running 17.9.4a code. We've observed intermittent delays with vocera broadcasts. Media-Stream multicast direct is disabled on all the WLANs. "show ap multicast mom" command shows the AP as "up" for the multicast com...
Hello,
I'm deploying some office extend 1810 access points and having some really poor performance with these out of the box. I've adjusted the MSS on AP down to 1320 and I've jumped from 2Mbps up to 80Mbps on my tests to speedtest.net. I want to g...
Hello,
I'm running WLC code 8.0.121 (soon to be 8.0.132) and I'm looking to enable Fast transition with assisted roaming on my corporate network. The goal is to not have to create a separate SSID for fast transition clients. I've read that the code ...
I'm having issues getting a WGB bridge (autonomous) connected to an SSID. The SSID is broadcast from a centralized WLC with lightweight access points. It supports WPA/TKIP or WPA2/AES with 802.1x/cckm for authentication key management. PEAP(MS-Ch...
Thank you for the information, but the commands referenced in that document don't seem to work"ap name apname clear-personal-ssidalso the button in the GUI doesn't seem to work either to clear it.
17.9.3 definitely has IGMP bugs thats fixed in 17.9.4 and 17.9.5 higher https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-9/release-notes/rn-17-9-9800.html -Access points intermittently stop sending Internet Group Management Protocol...
Yeah we are using Vocera. What code are you running on your WLC? I have also seen multicast not work at times and turned off the "igmp snooping" and "igmp snooping querier" on the WLC and turned it back on, only to have everything work again. With...
I have an update on this. I had a TAC case with Cisco to determine why we were having these issues. The engineer mentioned that they have seen performance issues when the unique client count approaches 90,000. We had between 140,000 and 120,000 uni...
They have a section in the release notes you may want to try:Important NotesTip To clean up long queues and long running processes, we recommend that you schedule a full restart of Cisco CMX once a month during a low activity time, such as late at ni...
